MX-M264N/M314N/M354N Operation-Manual GB

SCANNER/INTERNET FAX
Select the special modes.
2
(1) Touch the [Special Modes] key.
(2) Touch the [Program] key.
SPECIAL MODES (page 5-71)
(1) (2)
Retrieve the stored program.
Program
OK
(1) Touch the desired program key.
3
Program 1
Program 3
Program 5
Program 2
Program 4
Program 6
1
2
(2) Touch the [OK] key.
Program 7
Program 8
Program 9
Program 10
Program 11
Program 12
4
Program:Program 1
xxx@xx.xxx.com
Scan
Send Settings
Address Review
File
Quick File
Preview
Internet Fax
Original
Exposure
Resolution
File Format
Colour Mode
Special Modes
Fax USB Mem. Scan
Scan: Auto A4 Send:
Auto
Text
200X200dpi
PDF
PDF
Auto/Greyscale
PC Scan
Auto
Select additional settings.
When a program is used, the following settings can be
additionally specified:
• Image Settings: Original scan size*, send size, file format,
colour mode
• Send settings
• Special modes: Timer Transmission, Card Shot, File, Quick
File, Transaction Report
* When stored in the program, this cannot be additionally
specified.
• The screen that appears will vary depending on the destination stored in the program.
• The mode cannot be changed here.
• Functions stored in the program cannot be cancelled here.
5
Press the [START] key.
Scanning begins.
• If you inserted the original pages in the document feeder tray, all pages are scanned.
A beep will sound to indicate that scanning is finished.
• If you are scanning the original on the document glass, scan each page one page at a time.
When scanning finishes, place the next original and press the [START] key. Repeat until all pages have been scanned and
then touch the [Read-End] key.
A beep will sound to indicate that scanning is finished.
To cancel scanning...
Press the [STOP] key (
) to cancel the operation.
5-74
Contents