MX-M264N/M314N/M354N Operation-Manual GB

PRINTER
CHANGING TO ANOTHER PAPER SIZE AND
PRINTING WHEN PAPER RUNS OUT
If printing stops because the machine ran out of paper, or if the size of paper specified in the printer driver is not loaded
in the machine, a message will appear in the touch panel. Printing will begin automatically when the [OK] key is touched
and paper is loaded in the machine. If you wish to print on paper in another tray because the desired size of paper is not
immediately available, follow the steps below.
1
JOB STATUS
Press the [JOB STATUS] key.
2
Print Job Scan to Fax Job Internet Fax
Job Queue Sets / Progress Status
Computer01 020 / 001 Paper Empty
1
1
Spool
Job Queue
Complete
Detail
Display details on the print job for which
there is no paper.
(1) Touch the key of the job for which "Paper
Empty" appeared.
(2) Touch the [Detail] key.
Priority
Stop/Delete
(1) (2)
Detail
OK
Touch the [Paper Select] key.
Computer01 020 / 000 Paper Empty
Data : File-01.tiff
3
Colour / B/W : B/W
Paper :
A3
Plain
Paper Select
Document
Style:
Output :
2-Sided
(Book)
Special
Modes:
Detail
Computer01 020 / 000
Paper Empty
OK
Touch the key of the tray that has the
paper you wish to use.
4
Paper Select
1.A4
2.A4R
Paper Tray
Plain
Plain
Bypass Tray
A4
Plain
Printing begins.
3.B4
4.A3
Plain
Plain
If you changed to a different paper size, printing may not take place correctly; for example part of the text or image may run
off the paper.
3-71
Contents