MX-M264N/M314N/M354N Operation-Manual GB

COPIER
BASIC PROCEDURE FOR MAKING
COPIES
This section explains the basic procedures for making copies, including selection of the copy ratio and other copy
settings.
MAKING COPIES
USING THE AUTOMATIC DOCUMENT FEEDER TO
MAKE COPIES
This section explains how to make copies (1-sided copies of 1-sided originals) using the automatic document feeder.
1
Indicator line
Place the originals face up in the
document feeder tray with the edges
aligned evenly.
Insert the originals all the way into the document feeder tray.
Multiple originals can be placed in the document feeder tray.
The stack of originals must not be higher than the indicator line
on the tray.
2
Exposure
Auto
Copy Ratio
100%
Original
Auto
A4
1. A4
2. A4R
3. B4
4. A3
Plain
A4
Paper Select
Auto
A4
Plain
Special Modes
2-Sided Copy
Output
File
Quick File
Preview
Check the paper to be used.
Make sure that the desired paper (tray) is selected.
• To change the paper (tray), touch the [Paper Select] key.
PAPER TRAYS (page 2-11)
Depending on the size of the placed original, there may be cases where the same size of paper as the original is not
selected automatically. In this event, change the paper size manually.
2-12
Contents