MX-M264N/M314N/M354N Operation-Manual GB

SYSTEM SETTINGS
Item Factory default setting Page
Speaker Volume Setting –
• Receive Signal
• Communication Error Signal
Middle
Middle
7-82
Original Print on Transaction Report Print Out Error Report Only 7-82
Transaction Report Print Select Setting
• Single Sending
•Broadcasting
• Receiving
Activity Report Print Select Setting
• Auto Print at Memory Full
• Print Daily at Designated Time
Print Out Error Report Only
Print Out All Report
No Printed Report
Disabled
Disabled
7-82
7-83
Body Text Print Select Setting Disabled 7-83
Pre-Setting Mail Signature Disabled 7-83
I-Fax Send Settings 7-83
I-Fax Reception Report On/Off Setting Disabled 7-83
I-Fax Reception Report Request Timeout Setting 1 hour 7-83
Number of Resend Times at Reception Error 2 7-83
Maximum Size of E-mail Attachments Unlimited 7-83
Rotation Sending Setting All Enabled 7-84
Printing Page Number at Receiver Enabled 7-84
Recall in Case of Line Busy Times: 2, Interval 3 min. 7-84
Recall in Case of Communication Error Times: 2, Interval 3 min. 7-84
I-Fax Receive Settings 7-84
Auto Receive Reduce Setting Enabled 7-84
Duplex Reception Setting Disabled 7-84
Set Address for Data Forwarding –
•Direct SMTP
• Add Hostname or IP Address Too
Disabled
Disabled
7-84
• Hostname or IP Address –
Letter Size RX Reduce Print* 4 Disabled 7-85
Receiving Date & Time Print Disabled 7-85
A3 RX Reduce* 4 Disabled 7-85
POP3 Communication Timeout Setting 60 sec. 7-85
Reception Check Interval Setting 5 min. 7-85
I-Fax Output Setting Varies depending on the machine configuration 7-85
Allow/Reject Mail or Domain Name Setting All Invalid 7-85
*1 When the hard disk drive and Internet fax expansion kit are installed.
*2 When the facsimile expansion kit is installed.
*3 When network connection is enabled.
*4 This function is not available in some countries and regions.
7-39
Contents