MX-M264N/M314N/M354N Operation-Manual GB

FACSIMILE
Resending to unsuccessful broadcast transmission destinations
The results of a completed broadcast transmission can be checked in the job status screen. If transmission to any of the
destinations failed, resend the fax to those destinations.
1
JOB STATUS
Press the [JOB STATUS] key.
Print Job
Scan to
Fax Job
Internet Fax
Touch the [Complete] key.
1
2
3
Address
Broadcast0001
Set Time Pages Status
10:00 04/01 020/003 Connecting
0123456789 10:05 04/01 000/004 Waiting
AAA AAA
10:22 04/01 000/004 Waiting
1
1
Job Queue
Complete
If the job status screen of fax mode does not appear, touch the
[Fax Job] tab.
4
BBB BBB
10:30 04/01 000/010 Waiting
2
5
Broadcast
10:33 04/01 000/010 Waiting
Detail
Priority
Stop/Delete
If the broadcast transmission included destinations of different modes, the same broadcast transmission key will
appear in each of those modes.
3
Print Job
Address
Broadcast0001
Broadcast0002
CCC CCC
(1) (2)
Scan to
Fax Job
Start Time Pages Status
10:00 04/01 010/003 NG000000
10:05 04/01 001/001 Send OK
10:22 04/01 004/004 Send OK
0123456789 10:30 04/01 010/010 Send OK
1
1
Job Queue
Complete
Detail
Display details on the broadcast
transmission.
(1) Touch the key of the completed broadcast
transmission.
(2) Touch the [Detail] key.
Call
"Broadcastxxxx" will appear as the destination of the broadcast job key. The job control number that appeared in the
touch panel when scanning ended appears in "xxxx".
4-43
Contents