07.07.2014 Views

MX-M264N/M314N/M354N Operation-Manual GB

MX-M264N/M314N/M354N Operation-Manual GB

MX-M264N/M314N/M354N Operation-Manual GB

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

SCANNER/INTERNET FAX<br />

(1) (2)<br />

Enter the selected metadata item.<br />

4<br />

Data Entry<br />

User ID<br />

6 12 18<br />

Value 1 Value 2<br />

Value 3 Value 4<br />

Value 5 Value 6<br />

Value 7 Value 8<br />

Value 9 Value 10<br />

Cancel<br />

Direct Entry<br />

OK<br />

1<br />

2<br />

(1) Touch the key of the value that you wish to<br />

enter.<br />

• When the entry values of the metadata item are in the<br />

form of selections, the selections are shown as keys.<br />

When a value is editable, you can touch the [Direct<br />

Entry] key to manually enter the value.<br />

• If the metadata item requires the entry of text, a text<br />

entry screen will appear. Enter the required information.<br />

Value 11 Value 12<br />

(2) Touch the [OK] key.<br />

• To change the number of keys displayed in the screen, touch the number of displayed items selector key. Select 6,<br />

12, or 18 keys.<br />

• For the procedure for entering text, see "ENTERING TEXT" (page 1-55) in "1. BEFORE USING THE MACHINE".<br />

Data Entry<br />

Set Name:Metadata 1<br />

Metadata Set<br />

Cancel<br />

OK<br />

When you have finished entering all<br />

items, touch the [OK] key.<br />

appUserId<br />

Value 1<br />

5<br />

fromName<br />

replyTo<br />

xxxx xxxx<br />

xxx@xx.xx.com<br />

1<br />

2<br />

documentPassword<br />

xxxx xxxx<br />

appUserPassword<br />

xxxxxx<br />

billCode1<br />

xxxxxx<br />

Scan<br />

Address Book<br />

Address Entry<br />

Internet Fax<br />

Original<br />

Exposure<br />

Fax<br />

Scan:<br />

Auto<br />

Data Entry<br />

Auto A4 Send:<br />

Text<br />

Auto<br />

Select image settings and any other<br />

settings, and perform the scan send<br />

procedure.<br />

6<br />

Send Settings<br />

Address Review<br />

File<br />

Quick File<br />

Preview<br />

Resolution<br />

File Format<br />

Colour Mode<br />

Special Modes<br />

200X200dpi<br />

PDF<br />

Auto/Greyscale<br />

PDF<br />

Metadata Entry<br />

• The procedures for selecting settings and performing<br />

transmission are the same as in the other modes.<br />

• To make changes to entered values, touch the [Metadata<br />

Entry] key once again. The entry screen of the selected<br />

metadata set will appear.<br />

• Transmission cannot be performed if the [Data Entry] tab is displayed and no metadata settings have been configured. To<br />

perform transmission without sending metadata, switch to a different mode by touching the tab of that mode and then<br />

perform transmission.<br />

• Before configuring metadata settings, you can specify addresses in all modes to be used. After metadata settings have<br />

been configured, only addresses in modes that are allowed in the selected metadata set can be specified.<br />

• When metadata settings have been configured or an address is specified in the [Data Entry] tab, it will not be possible to<br />

switch to another mode.<br />

• Metadata delivery is possible using the document filing function. The [Data Entry] tab appears in the transmission settings<br />

screen of document filing mode to allow metadata delivery. In addition, metadata delivery using document filing can be<br />

performed in [Document <strong>Operation</strong>s] in the Web pages.<br />

5-130<br />

Contents

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!