MX-M264N/M314N/M354N Operation-Manual GB

DOCUMENT FILING
PERFORMING "Scan to HDD"
1
Place the original.
Place the original face up in the document feeder tray, or face
down on the document glass.
2
(4)
COPY
Ready to scan to HDD.
Press [Start] to scan original.
File Retrieve Scan to HDD HDD Status Ex Data Access
File
Information Original Scan: Auto A4 Store: Auto
Preview
(2)
IMAGE SEND
Exposure
Resolution
Colour Mode
Special Modes
(1)
Auto
DOCUMENT
FILING
600X600dpi
Mono2
(3)
Switch to document filing mode and
select Scan to HDD settings.
(1) Touch the [DOCUMENT FILING] key.
(2) Touch the [Scan to HDD] tab.
If you do not wish to select settings, go to the next step.
(3) Select the original size, exposure,
resolution, colour mode, and special
modes.
See ""Scan to HDD" SCREEN" (page 6-18).
(4) Touch the [File Information] key.
The settings are the same as for "File". See "FILE
INFORMATION" (page 6-15).
If the original is 2-sided, be sure to touch the [Original] key and then touch the [2-Sided Booklet] key or the [2-Sided
Tablet] key as appropriate for the original.
3
Press the [START] key.
Scanning begins.
For the procedure for placing the original, see step 4 of "SAVING A FILE WITH "Quick File"" (page 6-11).
When Preview is enabled, the preview screen appears.
Checking the image before storing it (Preview) (page 6-22)
A beep will sound to indicate that Scan to HDD is completed.
To cancel scanning...
Press the [STOP] key ( ).
When Scan to HDD is performed without appending file information, the following user name and file name are automatically
assigned to the file.
User Name: User Unknown
File Name: Mode_Day-Month-Year_Hour-Minute-Second
(Example: HDD_04042012_112030)
Stored to: Main Folder
When user authentication is used, the user name that was used for login is automatically selected.
6-23
Contents