MX-M264N/M314N/M354N Operation-Manual GB

DOCUMENT FILING
4
(1) (2) (3)
Job Settings / Print
Number of Selected Files: 5
Number of Prints
1
(1 999)
Apply the Number from Stored Setting of
Each Job.
Cancel
Print and Delete the Data
Print and Save the Data
Printing a selected file.
The number of selected files appears in the number of selected
files display.
If you wish to use the number of copies that was stored with the
file, go to step (3).
(1) Touch the [Apply the Number from Stored
Setting of Each Job] checkbox so that it is
not selected ( ).
(2) Set the number of copies with the
keys.
You can also directly touch the numeric display and
change the number with the numeric keys.
(3) Touch the [Print and Delete the Data] key or
the [Print and Save the Data] key.
If the [Print and Delete the Data] key is touched, the files
will be automatically deleted after printing.
If the [Print and Save the Data] key is touched, the files
will be saved after printing.
6-34
Contents