MX-M264N/M314N/M354N Operation-Manual GB

FACSIMILE
CHECKING THE IMAGE BEFORE PRINTING
This function requires the hard disk drive.
When "Received Data Image Check Setting" is enabled* in the system settings (administrator), you can check a
received image in the touch panel before printing it out. When this function is enabled, follow the steps below to print a
received image.
* The factory default setting is disabled.
Depending on the size of the received data, part of the image in the image check screen on the touch panel may not appear.
1
The memory has received data.
Check the data?
No
Yes
When an image is received, a
confirmation prompt will appear. Touch
the [Yes] key.
If this message appears while you are configuring settings of
any type and you touch the [Yes] key, the settings that you are
configuring will be cancelled. If this message appears in
another mode, you will return to the base screen of image send
mode after checking the image.
(1)
Select the received image
Received Data List
Thumbnail
0123456789
04/04/2012
10:28
Back
Select All
Not checked
(1) Touch the key of the received image that
you want to check.
Multiple received images can be checked.
2
BBB BBB
9876543210
BBB 0612345678 BBB
BBB 0123456789 BBB
CCC CCC
Image Check
Forward
04/04/2012 10:14
04/04/2012 10:12
04/04/2012 10:08
04/04/2012 10:00
04/04/2012 10:00
Delete
Checked
Not checked
Checked
Not checked
Checked
Print
1
5
(2) Touch the [Image Check] key.
• To show thumbnails of the received images, touch the
[Thumbnail] key.
• To delete an image that has been selected, touch the
[Delete] key. To print an image that has been selected,
touch the [Print] key.
(2)
Image Check
0123456789 04/04/2012 10:28
Back
1 / 3
Check the received image and then
touch the [Print] key.
3
Display Rotation
Printing begins.
For information on the image check screen, see "IMAGE
CHECK SCREEN" (page 4-65).
0001 /0010
Print
If the screen of step 1 appears when you are configuring settings in the setting screens of any of the modes, the configured
settings will be cancelled if you view the image. After viewing the image, you will return to the base screen of image send
mode, regardless of which mode you were in previously.
System Settings (Administrator): Received Data Image Check Setting
Use this to specify whether or not a received fax can be viewed before it is printed.
4-63
Contents