07.07.2014 Views

MX-M264N/M314N/M354N Operation-Manual GB

MX-M264N/M314N/M354N Operation-Manual GB

MX-M264N/M314N/M354N Operation-Manual GB

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

FACSIMILE<br />

CHECKING THE IMAGE TO BE TRANSMITTED<br />

(Preview)<br />

This function requires the hard disk drive.<br />

If you touch the [Preview] key before scanning the original, you can check the scanned image in the touch panel before<br />

sending the image.<br />

* The factory default setting is disabled.<br />

Depending on the size of the transmission data, part of the preview image may not appear in the preview screen in the touch<br />

panel.<br />

1<br />

Place the original.<br />

Place the original face up in the document feeder tray, or face down on the document glass.<br />

Scan<br />

Internet Fax<br />

Fax<br />

USB Mem. Scan<br />

PC Scan<br />

Touch the [Preview] key to highlight it.<br />

Address Book<br />

Original<br />

Scan:<br />

Auto<br />

A4<br />

Send:<br />

Auto<br />

Direct TX<br />

Exposure<br />

Auto<br />

Sub Address<br />

Resolution<br />

Standard<br />

2<br />

Address Review<br />

File<br />

Special Modes<br />

Quick File<br />

Preview<br />

Auto Reception<br />

Fax Memory:100%<br />

3<br />

Select transmission settings and press the [START] key.<br />

"Originals are being read" appears while the originals are being scanned, and when scanning is finished, the preview screen<br />

appears on the touch panel. Transmission will not take place until you touch the [Start Sending] key in the preview screen.<br />

Preview<br />

B/W<br />

Sender Info<br />

Check the preview image and then touch<br />

the [Start Sending] key.<br />

4<br />

Function Rev.<br />

Display Rotation<br />

Transmission begins.<br />

For information on the preview screen, see "PREVIEW CHECK<br />

SCREEN" (page 4-58).<br />

0001<br />

/0010<br />

Start<br />

Sending<br />

System settings (administrator): Default Preview<br />

You can specify whether or not the [Preview] key function will be enabled in the base screens of the image send modes and<br />

in the address book.<br />

4-57<br />

Contents

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!