MX-M264N/M314N/M354N Operation-Manual GB

FACSIMILE
DELETING A DOCUMENT STORED FOR F-CODE
POLLING TRANSMISSION
When a document in an F-code memory polling box is no longer needed, follow the steps below to delete it.
A document in a memory box cannot be deleted while the document is being transmitted.
Select the special modes.
1
(1) Touch the [Special Modes] key.
(2) Touch the keys to switch through the screens.
(3) Touch the [Memory Box] key.
SPECIAL MODES (page 4-71)
Memory Box
Exit
Touch the [Delete Data] key.
2
Data Store
Polling Memory
Data Check
Delete Data
Confidential
Reception
Data Check
3
Memory Box - Delete Data
Box 1
Box 3
Box 5
Box 2
Box 4
Box 6
Public Box
Back
1
2
Touch the key of the F-code memory
polling box that has the document you
wish to delete.
appears in keys that have documents stored.
Box 7
Box 8
Box 9
Box 10
Box 11
Box 12
Touch the [Yes] key.
4
Delete the data in the memory box?
Press [Image Check] to check data.
Image Check
No
Yes
• The document is deleted and you return to the screen of step 3.
• Printing will begin.
You can touch the [Image Check] key to check the image in
the touch panel before deleting it. For information on the
image check screen, see "IMAGE CHECK SCREEN"
(page 4-65).
The [Image Check] function requires the hard disk drive.
To cancel the deletion...
Touch the [No] key. You will return to the screen of step 3 without deleting the document.
4-121
Contents