07.07.2014 Views

MX-M264N/M314N/M354N Operation-Manual GB

MX-M264N/M314N/M354N Operation-Manual GB

MX-M264N/M314N/M354N Operation-Manual GB

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

TROUBLESHOOTING<br />

REMOVING STAPLE JAMS<br />

Follow the steps below to remove a staple jam.<br />

FINISHER<br />

FINISHER<br />

1<br />

Open the cover.<br />

2<br />

While pressing the lever over to the left,<br />

slide the finisher to the left until it stops.<br />

Gently slide the finisher until it stops.<br />

3<br />

Lower the staple case release lever and<br />

remove the staple case.<br />

Pull the staple case out to the right.<br />

4<br />

Raise the lever at the front end of the<br />

staple case and remove the jammed<br />

staple.<br />

Remove the leading staple if it is bent. If bent staples remain, a<br />

staple jam will occur again.<br />

Take care that a bent staple does not hurt you.<br />

8-12<br />

Contents

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!