MX-M264N/M314N/M354N Operation-Manual GB

COPIER
CANCELLING A JOB THAT IS WAITING IN THE QUEUE
A copy job that is waiting to be printed can be cancelled.
1
JOB STATUS
Press the [JOB STATUS] key.
2
(1) (2)
Print Job Scan to
Fax Job Internet Fax
Job Queue Sets / Progress Status
Spool
1 Computer01 020 / 001 Printing
Job Queue
2 Copy
002 / 000 Waiting
1 Complete
3 Computer02 002 / 000 Waiting
1
4 0312345678 001 / 000 Waiting
Detail
Priority
Stop/Delete
(3) (4)
Cancel the job.
(1) Touch the [Print Job] tab.
(2) Change the print job status mode to [Job
Queue].
Touch this key to change modes. The selected mode will
be highlighted.
(3) Touch the key of the copy job that you wish
to cancel.
(4) Touch the [Stop/Delete] key.
(5) A message appears to confirm the
cancellation. Touch the [Yes] key.
Delete the job?
Copy
No
Yes
The selected job key is deleted and printing is cancelled.
If the job in progress is a copy job, you can also press the [STOP] key (
To cancel, touch the [Yes] key.
) to display the above screen.
If you do not want to cancel the selected print job...
Touch the [No] key in step (5).
2-127
Contents