07.07.2014 Views

MX-M264N/M314N/M354N Operation-Manual GB

MX-M264N/M314N/M354N Operation-Manual GB

MX-M264N/M314N/M354N Operation-Manual GB

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

FACSIMILE<br />

[R] key<br />

When the machine is connected to a PBX, the "PBX Setting" can be enabled to automatically connect to the outside line<br />

each time you dial normally. When the PBX setting is enabled, the [R] key appears in the base screen. To dial a number<br />

inside your PBX, touch the [R] key before dialling to temporarily cancel the "PBX Setting".<br />

Scan<br />

Internet Fax<br />

Fax<br />

USB Mem. Scan<br />

PC Scan<br />

Address Book<br />

Original<br />

Scan:<br />

Auto<br />

Send:<br />

Auto<br />

Direct TX<br />

Exposure<br />

Auto<br />

Sub Address<br />

Resolution<br />

Standard<br />

Address Review<br />

Special Modes<br />

File<br />

Quick File<br />

R<br />

Preview<br />

Auto Reception<br />

Fax Memory:100%<br />

• This Setting can only be activated in Germany.<br />

• The [R] key can be included in a fax number stored in an one-touch key.<br />

• When the [Speaker] key is touched, the "PBX Setting" is temporarily cancelled and the [R] key does not appear.<br />

• When the [R] key is touched before dialling, an F-code (sub-address and passcode) cannot be used. Likewise, an<br />

one-touch key in which an F-code (sub-address and passcode) is stored cannot be used.<br />

System Settings (Administrator): PBX Setting<br />

This is used to enable PBX Setting.<br />

4-10<br />

Contents

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!