07.07.2014 Views

MX-M264N/M314N/M354N Operation-Manual GB

MX-M264N/M314N/M354N Operation-Manual GB

MX-M264N/M314N/M354N Operation-Manual GB

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

BEFORE USING THE MACHINE<br />

SHARP OSA<br />

This function requires the hard disk drive.<br />

Sharp OSA (Open Systems Architecture) is an architecture that enables external applications to be directly connected to<br />

a digital multifunction machine over a network.<br />

When a digital multifunction machine that supports Sharp OSA is used, the operation panel controls and functions of the<br />

machine such as scan send can be linked to an external application.<br />

There are two types of external applications: "standard application" and "external account application". An "external<br />

account application" is used for centralized account management of a multifunction machine on a network. A "standard<br />

application" refers to all other applications.<br />

APPLICATION COMMUNICATION MODULE (<strong>MX</strong>-A<strong>MX</strong>2)<br />

The application communication module is required to use a "standard application" on the machine.<br />

When a previously registered standard application is selected in the Web pages of the machine, the machine retrieves<br />

the operation screen from the registered URL. Control of the operation screen is performed by the standard application,<br />

and Scan to FTP, Scan to Network Folder, and HTTPS transmission can be executed.<br />

Standard application setup<br />

To enable a general application in the Web pages of the machine, click [Application Settings] in the administrator menu<br />

frame, and then [External Applications Settings] and [Standard Applications]. Configure settings for the standard<br />

application in the screen that appears.<br />

Selecting a standard application<br />

The procedure for selecting a general application that has been enabled in the Web pages of the machine is explained<br />

below.<br />

1<br />

COPY<br />

IMAGE SEND<br />

Ready to scan for copy.<br />

Exposure<br />

Auto<br />

1. A4<br />

2. A4R<br />

3. B4<br />

4. A3<br />

DOCUMENT<br />

FILING<br />

Plain<br />

A4<br />

Special Modes<br />

2-Sided Copy<br />

Output<br />

File<br />

Quick File<br />

0<br />

Touch the [Sharp OSA] key in the mode<br />

select keys.<br />

If no standard applications have been stored in the Web pages,<br />

the key cannot be touched.<br />

Copy Ratio<br />

100%<br />

Original<br />

Auto<br />

A4<br />

Paper Select<br />

Auto<br />

A4<br />

Plain<br />

Preview<br />

1-45<br />

Contents

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!