MX-M264N/M314N/M354N Operation-Manual GB

COPIER
PAPER TRAYS
The machine is set to automatically select a tray that has the same size of paper as the size of the placed original
(automatic paper tray selection).
If the correct paper size is not selected or you wish to change the paper size, you can select the paper tray manually.
Special Modes
Touch the [Paper Select] key.
Exposure
Auto
1. A4
2. A4R
3. B4
4. A3
Plain
A4
2-Sided Copy
Output
File
Quick File
Copy Ratio
100%
Original
Auto
A4
Paper Select
Auto
A4
Plain
Preview
1
You can also touch the paper size display (A) to open the paper tray settings.
(A)
Special Modes
Exposure
Auto
1. A4
2. A4R
3. B4
4. A3
Plain
A4
2-Sided Copy
Output
File
Quick File
Copy Ratio
100%
Original
Auto
A4
Paper Select
Auto
A4
Plain
Preview
2
(1) (2)
Paper Select
OK
Paper Tray
Bypass Tray
1. A4
Plain
A4
Plain
2. A4R
Plain
Select the tray that you want to use.
(1) Touch the key of the desired tray.
(2) Touch the [OK] key.
You will return to the base screen and the selected tray
will be highlighted.
3. B4
4. A3
Plain
Plain
If the selected tray runs out of paper during a copy job and there is another tray that has the same size and type of paper,
that tray will be automatically selected and the copy job will continue.
To return to automatic paper tray selection after selecting a tray manually, press the [CLEAR ALL] key ( ).
System Settings (Administrator): Initial Status Settings (Paper Tray)
Use this setting to change the tray that is selected by default.
2-11
Contents