Infortrend RAID Controller Manual

Functional Table of Contents:
This functional table of contents helps you to quickly locate the
descriptions of functions included in this manual.
Chapter 2 Functional Description Page number
2.4.2 Identifying Drives 2-7
Flash Selected SCSI Drive2-7 2-7
Flash All SCSI Drives 2-8
Flash All but Selected Drives 2-8
2.4.3 Automatic rebuild and manual rebuild 2-9
Automatic rebuild 2-9
Manual rebuild 2-10
2.4.4 Concurrent Rebuild in RAID (0+1) 2-10
Chapter 4 Connecting to Terminal Emulation Page number
Chapter 6 /
Chapter 8
Communication Parameters: configuring RS-232 connection 4-1
Configuring Ethernet connection 4-4
Out-of-Band via Ethernet 4-4
Configuration Procedure 4-4
Starting RAID via the LCD
Panel/Terminal Emulation
Page number:
LCD/ Terminal
6.1/8.1 Power on RAID Enclosure
Starting RAID Configuration
6-1/8-1
6.2/8.2 Caching Parameters 6-1/8-1
Optimization for Random or Sequential I/O 6-2/8-3
Write-Back/Write-Through Cache Enable/Disable 6-3/8-3
6.3/8.3 Viewing Connected Drives 6-4/8-4
6.4/8.4 Creating a Logical Drive 6-6/8-5
Choosing a RAID Level 6-6/8-5
Choosing Member Drives 6-6/8-5
Maximum Drive Capacity 6-7/8-6
Spare Drive Assignments 6-7/8-6
Logical Drive Assignments 8-6
6.5/8.5 Creating a Logical Volume 6-8/8-8
6.6/8.6 Partitioning a Logical Drive/Logical Volume 6-9/8-9
6.7/8.7 Mapping a Logical Drive/Logical Volume to Host LUN 6-10/8-11
6.8/8.8 Assigning Spare Drive, Rebuild Settings 6-11/8-13
Adding a Local Spare Drive 6-11/8-13
Adding Global Spare Drive 6-12/8-13
(Logical Drive) Rebuild Settings 6-12
6.9/8.9 Viewing and Editing Logical Drives and Drive
Members
6-13/8-14
xv