Infortrend RAID Controller Manual

13-18
(where "filename" is the filename of the uncompressed disk image,
"/vol/dev/aliases/floppy0" refers to the device name of the
floppy drive.)
The disk image files require a floppy drive equipped UNIX system
to restore to a floppy diskette. Some UNIX systems might not have
the CD-ROM drive; we provide both compressed and
uncompressed disk image files for easy file transfer between two
systems.
13.7.2 Label the Installation Diskette(s)
1. Please refer to "How to Make the Installation Diskette from the
Disk Image File" section above to create the floppy diskettes for
installation.
2. Please label the diskette made of "IABR111G" as:
+--------------------------------------+
| Infortrend RAID Controllers |
| |
| In-band SCSI Drivers and Utilities |
| for Sun Solaris 2.5.x/2.6 |
| on SPARC platform |
| |
| Version 1.11G |
| (Code:IABR111G) |
+--------------------------------------+
13.7.3 Install the In-band SCSI Driver and Text RAID
Manager for SUN Solaris 2.5/2.6/7/8
A Installing from the driver diskette created from image file
A1. To install the driver from the driver diskette, type:
# pkgadd -d /floppy/floppy0
(where "/floppy/floppy0" is the mounted driver diskette.)
Use Solaris Volume Manager and "volcheck" to mount the driver
diskette, or mount it manually.
A2. A list of selections will show as below, choose "1" to install
the driver for In-band SCSI.
1. dascsparc RAID In-Band SCSI Driver for Solaris
(sparc) 1.11c
2. mgrsprc32 Text RAID Manager for Solaris SPARC
32-bits (sparc) 1.52e
3. mgrsprc64 Text RAID Manager for Solaris SPARC
64-bits (sparc) 1.52h
4. rhbasprc PCI-to-SCSI RAID Host Adapter Driver
for Solaris (sparc) 1.11f
5. snmpspk32 RAID SNMP SUBAGENT for Solaris SPARC
32-bits (sparc) 1.15g
6. snmpspk64 RAID SNMP SUBAGENT for Solaris 64-bits
(sparc) 1.15h
Infortrend