Infortrend RAID Controller Manual

5-2
5.3 Logical Drive Status
Logical Drive
Logical Drive:
RAID level:
Drive numbers:
Logical Drive status:
The Logical Drive number.
The RAID level used in this logical drive
The number of SCSI drives in this logical
drive.
xxxxMB The capacity of this logical drive.
SB=x Standby drives available for this logical
drive. All the spare drive(s) available for this
logical drive will be counted in this field,
both Global Spare Drives and Local Spare
Drives.
xxxxMB INITING The logical drive is now initializing.
xxxxMB INVALID The logical drive has been created with
“Optimization for Sequential I/O”, but the
current setting is “Optimization for Random
I/O.”
-OR-
The logical drive has been created with
“Optimization for Random I/O,” but the
current setting is “Optimization for
Sequential I/O.”
xxxxMB GD SB=x The logical drive is in good condition.
xxxxMB FL SB=x One drive failed in this logical drive.
xxxxMB RB SB=x Logical Drive is rebuilding.
xxxxMB DRVMISS One of the drives cannot be detected.
INCOMPLETE
ARRAY
RAID level
LG=0 RAID5 DRV=3
2021MB GD SB=1
Logical Drive status
Drive numbers
Two or more drives failed in this logical
drive.
Infortrend