Infortrend RAID Controller Manual

6-32
SCSI Drive Read/Write Test
From the “View and Edit SCSI Drives”
menu, select a new or used drive that the
utility is to be performed on; then press
ENT. Select “SCSI Drive Utilities;" then
press ENT. Choose “Read/Write Test”
and press ENT. Press▼ or ▲ to select
and choose to enable/disable the
following options: 1. "Auto Reassign
Bad Block; 2. Abort When Error Occurs;
3. Drive Test for - Read Only/Read and
Write. When finished with
configuration, select "Execute Drive
Testing" and press ENT to proceed.
The Read/Write test progress will be
indicated as a percentage.
You may press ESC and select
"Read/Write Test" later and press ▼ or
▲ to select to "View Read/Write Testing
Progress" or to "List Current Bad Block
Table." If you want to stop testing the
drive, select "Abort Drive Testing" and
press ENT to proceed.
Drive Read/Write
Test ..
Auto Reassign
Disabled ..
..
Abort When Error
Occur-Enabled
....
Drive Test for
Read and Write..
Execute Drive
Testing ..
Drv Testing 23%
Please Wait !
View Read/Write
Test Progress ..
List Current
Bad Block Table.
Abort Read/Write
Testing ..
Infortrend