Infortrend RAID Controller Manual

13-4
1. Install SNMP service and TCP/IP network protocol to Windows
NT.
2. Copy RAIDCOMM.DLL and RAIDSNMP.DLL in this directory to
SystemRoot \system32. (where "SystemRoot" is the system root
directory of Windows NT). For Example:
COPY RAIDCOMM.DLL C:\WINNT\SYSTEM32
COPY RAIDSNMP.DLL C:\WINNT\SYSTEM32
3. At the DOS command prompt, type REGEDT32 and press
.
4. In the registry editor, walk down:
\HKEY_LOCAL_MACHINE
\SYSTEM
\CurrentControlSet
\Services
\SNMP
\Parameters
\ExtensionAgents
Add the following entry for the Infortrend RAID SNMP Extension
Agent:
n:REG_SZ:SOFTWARE\Infortrend\RAIDAgent\CurrentVersion
(where "n" is the index of the extension agent of system; it may be
3.)
5. Click on "ExtensionAgents" registry, select "Edit" option and then
select "Add Value". Type a proper value for value name (it may be
3), and set data type to REG_SZ, then click on "OK" button.
6. Type "SOFTWARE\Infortrend\RAIDAgent\CurrentVersion" for
string, then click on "OK" button.
7. Go to HKEY_LOCAL_MACHINE\SOFTWARE, click on
"SOFTWARE", select "Edit" option and then select "Add Key".
8. Type "Infortrend" for key name, then click on "OK" button. Click on
"Infortrend", select "Edit" option and select "Add Key".
9. Type "RAIDAgent" for key name, then click on "OK" button. Click
on "RAIDAgent", select "Edit" option and select "Add Key".
10. Type "CurrentVersion" for key name, then click on "OK" button.
Click on "CurrentVersion", select "Edit" option and select "Add
value".
11. Type "Pathname" for value name, and set data type to
REG_EXPAND_SZ, then click on "OK" button.
12. Type "%SystemRoot%\System32\RAIDSNMP.DLL" for string,
then click on "OK" button.
13. Close REGEDT32, then the SNMP Agent is ready for Infortrend
RAID Manager.
14. Restart the SNMP service or restart your system.
Infortrend