Infortrend RAID Controller Manual

5. Reboot the system.
6. Run the Text RAID Manager for SCO in "/usr/lib":
# cd /usr/lib
# ./raidman
Please follow the Instruction manual for the detail operation of the
Terminal Emulation or the Text RAID Manager.
13.6.7 SNMP Readme File
1. In the Package
• an mib file(*.defs)
• an executable file, i.e. SMUX Agent
• an initializing file
2. Before Setting Raid SNMP SMUX Agent
• Give it an OID (e.g. enterprises.1714.1.1.10)
• Its password (e.g. mypassword)
• Its priority (e.g. 2). The priority in default is -1.
• Prepare the IP address of the manager
3. Installing
• change directory to /usr/lib/raidsnmp and put the mib file
and the agent in the same directory
• add one line to "snmpd.peer" e.g., "raidsnmp,"
1.3.6.1.4.1.1714.1.1.9000.1,"nopassword". raidsnmp is the
excution file name of the SNMP Agent
1.3.6.1.4.1.1714.1.1.9000.1 is the OID of the SNMP Agent as
described previously. nopassword is the password to register
its mib for SNMP Agent. (Refer to the system manuals)
• Add one line to snmpd.trap:
For SCO Open Server, should look like this:
public,0.0.0.0,162
For SCO UnixWare, it should look like this:
ip,public,0.0.0.0.162
(Refer to system manuals.)
Comment:
You can find snmpd.peers and snmpd.trap in /etc/ for
SCO OpenServer and in /etc/netmgt/ for SCO UnixWare.
4. Running
keyin: cd /usr/lib/raidsnmp;./raidsnmp
5. Initializing file ( /usr/lib/raidsnmp/raidcomm.ini )
The Descriptions of Contents of the "RAIDCOMM.INI"
Examples:
[TRAP]
In-band Text RAID Manager and SNMP Agent Installation 13-15