Infortrend RAID Controller Manual

(where "filename" is the filename of the uncompressed disk image,
"/vol/dev/aliases/floppy0" refers to the device name of the
floppy drive.)
The disk image files require a floppy drive equipped UNIX system
to restore to a floppy diskette. Some UNIX systems might not have
the CD-ROM drive; we provide both compressed and
uncompressed disk image files for easy file transfer between two
systems.
13.8.2 Label the Installation Diskette(s)
1. Please refer to "How to Make the Installation Diskette from the
Disk Image File" section above to create the floppy diskettes for
installation.
2. Please label the diskette made of "IABS111F" as:
+--------------------------------------+
| Infortrend RAID Controllers |
| |
| In-band SCSI Drivers and Utilities |
| for Sun Solaris 2.5.x/2.6 |
| on x86 platform |
| |
| Version 1.11F |
| (Code:IABS111F) |
+--------------------------------------+
13.8.3 Install the In-band SCSI Driver and Text RAID
Manager for SUN Solaris 2.5/2.6/7/8
A Installing from the driver diskette created from image file
A1. To install the driver from the driver diskette, type:
# pkgadd -d /floppy/floppy0
(where "/floppy/floppy0" is the mounted driver diskette. Use
Solaris Volume Manager and "volcheck" to mount the driver
diskette, or mount it manually.)
A2. A list of selections will show as below, choose "1" to install the
driver for In-band SCSI.
The following packages are available:
The following packages are available:
1 RAID In-band SCSI Driver for Solaris 2.5, 2.6
2 Text RAID Management for Solaris 2.5,2.6
3 PCI-SCSI RAID Host Adapter Driver
4 RAID SNMP SUBAGENT for Solaris 2.5,2.6
Select package(s) you will to process (or 'all' to process
all packages). (default: all) [?,??,q]: 1
A3. After the driver installed, the same selections appear again.
Choose "2" this time to install the Text RAID Manager for Solaris.
In-band Text RAID Manager and SNMP Agent Installation 13-21