Infortrend RAID Controller Manual

6-14
Deleting a Partition of a Logical Drive
Press ENT for two seconds to enter the
Main Menu. Press ▼ or ▲ to select
"View and Edit Logical Drives..,” then
press ENT.
Press ▼ or ▲ to select a logical drive,
then press ENT.
Press ▼ or ▲ to choose “Partition
Logical Drive," then press ENT.
The current partition’s information will
be displayed on the LCD. Press ▼ or ▲
to browse through the existing
partitions in the logical drive. Select a
partition by pressing ENT for two
seconds.
Use ▼ or ▲ to change the number of the
flashing digit to “0," then press ENT to
move to the next digit. After changing
all the digits, press ENT for two
seconds.
The rest of the drive space will be
automatically allocated to the last
partition.
Figure 6 - 1 Drive Space Allocated to the Last Partition
Logical Drive
1000MB
Partition 2 - 300MB
Partition 3 - 400MB
Delete
Partition 1
Logical Drive
1000MB
The capacity of the deleted partition will be added to the last partition.
WARNING!
View and Edit
Logical Drives ↕
LG0 RAID5 DRV=3
2012MB GD SB=1
Partition
Logical Drive ..
LG=0 Partition=1
200MB ?
Partition 0 - 100MB Partition 0 - 100MB • The capacity of the deleted
Partition 1 - 200MB
partitions will be added to
the last partition.
Partition 1 - 300MB
LG=0 Partition=1
300MB ?
LG=0 Partition=2
600MB ?
Partition 2 - 600MB
• Whenever there is a partition change, all host LUN mappings will be removed.
Therefore, every time a partition has been changed, it is necessary to re-configure all
host LUN mappings.
=
400 + 200
Infortrend