Infortrend RAID Controller Manual

You may add more entries, delete or edit the existing entries.
Sample Configuration:
Figure 9 - 7 LUN Filtering - Configuration Sample
1. Host HBA port name (WWPN) list:
Host A = 0x…F111
Host B = 0x…F112
Host C = 0x…F222
2. Controller Configuration:
• Logical drives are LD0 and LD1. LD0 is partitioned into two:
P0 and P1.
• Filter Entry (LUN map) list
Configuration Procedure:
1. Create an entry list for the specific logical unit from "View and Edit
Host LUN"\Host Channel\Create Host Filter Entry."
2. Select Host Channel ID, and then select a configured logical unit (a
logical drive, logical volume, or one of its logical partitions) to
create the entry. The entry submenu will appear.
3. Enter and modify the Host ID, Host ID Mask, Filter Type, and
Access Mode.
Fibre Operation 9-21