Infortrend RAID Controller Manual

2-Line LCD High +12V Voltage Detected (_.__)
Terminal [3F21] ALERT: +12V High Voltage Detected (current_voltage)
Event Type �Critical �Warning �Notification
What The current +12V voltage source is now higher than the preset voltage
Happens? threshold.
D-20
What to
Do?
Check the power supply, voltage threshold settings and contact the
service department of your RAID system supplier.
2-Line LCD Low +12V Voltage Detected (_.__)
Terminal [3F21] ALERT: +12V Low Voltage Detected (current_voltage)
Event Type �Critical �Warning �Notification
What The current +12V voltage source is now lower than the preset voltage
Happens? threshold.
What to
Do?
Check the power supply, voltage threshold settings and contact the
service department of your RAID system supplier.
2-Line LCD SAF-TE_: Fan(_) Failure Detected
Terminal [3F22] SAF-TE Device (_) ALERT: Cooling Fan Failure Detected (_)
Event Type �Critical �Warning �Notification
What
Happens?
Cooling fan failure detected by SAF-TE enclosure management.
What to
Do?
Check cooling fan(s) of the RAID enclosure, and contact the service
department of your RAID system supplier.
2-Line LCD SAF-TE_: Elevated Temperature Alert
Terminal [3F23] SAF-TE Device (_) ALERT: Elevated Temperature Alert
Event Type �Critical �Warning �Notification
What
Happens?
Abnormally high temperature detected by SAF-TE facility.
What to
Do?
Contact the service department your RAID system supplier.
2-Line LCD SAF-TE_: Power(_) Back To On-Line
Terminal [3FA1] SAF-TE Device (_) NOTICE: Power Back On-Line (_)
Event Type �Critical �Warning �Notification
What
Happens?
Power supply back to on-line state.
What to
Do?
Press to clear the message.
Infortrend