Infortrend RAID Controller Manual

12-4
Figure 12 - 4 Partitioning Logical Units
RAID 5
8GB
Logical Drive 0
RAID 0
6GB
Logical Drive 1
Partition 0 - 2GB
Partition 1 - 1GB
Partition 2 - 5GB
Partition 0
2.5GB
Partition 1
1.5GB
Map each partition to a host SCSI ID (Primary or Secondary ID). You
may have to create Primary and Secondary IDs separately on host
and drive channels if these IDs are not available. The configuration
procedure will be discussed in section "12.3." Partitions mapped to a
Primary ID (meaning that the partition has been assigned to the
Primary controller) will be managed by the Primary controller, and
those mapped to a Secondary ID the Secondary controller. Each SCSI
ID (or LUN under ID) will act as one individual hard drive to the host
computer virtually.
Figure 12 - 5 Mapping System Drives (LUNs)
Infortrend