Infortrend RAID Controller Manual

Logical Drive Event:
2-Line LCD CHL=_ ID=_ Drive Failure
Terminal [2101] LG:_ Logical Drive ALERT: CHL:_ ID:_ SCSI Drive Failure
Event Type �Critical �Warning �Notification
What
Happens?
The specified hard drive in the specified logical drive has failed.
What to
Do?
Bringing a new drive or spare drive to rebuild.
2-Line LCD LG ALERT: Init Failed!
Terminal [2102] LG:_ Logical Drive ALERT: Initialization Failed
Event Type �Critical �Warning �Notification
What
Happens?
What to
Do?
Logical drive initialization failed. It could be one of the following
reason:
1. Logical drive initialization canceled by user.
2. On of the member drives failed during logical drive initialization.
3. One of the member drive encountered bad block.
Replace the failed drive and perform logical drive initialization again.
2-Line LCD LG=_ Rebuild Failed
Terminal [2103] LG:_ Logical Drive ALERT: Rebuild Failed
Event Type �Critical �Warning �Notification
What
Happens?
What to
Do?
Logical drive rebuild failed. It could be one of the following reason:
1. The rebuild has been canceled by user.
2. The drive using for rebuild might failed during rebuild.
3. Other member drives encountered bad block during the rebuild.
Using another new drive to perform the rebuild again.
2-Line LCD LG=_ Check Parity Failed !
Terminal [2104] LG_ Logical Drive ALERT: Parity Check Failed
Event Type �Critical �Warning �Notification
What
Happens?
One member drive of the logical drive has failed.
What to
Do?
Rebuild the logical drive first, then perform check parity. Check parity
can only be performed on a logical drive with “Good” (GD) status.
Event Messages D-15