Infortrend RAID Controller Manual

Appendix
D
Event Messages
The controller events can be categorized as follows:
Critical Errors that need to attend to immediately
Warning Errors
Notification Command processed message sent from Firmware
The controller’s event log management will record all the events from power
on, it can record up to 1,000 events. To power off or to reset the controller will
cause an automatic deletion of all the recorded event logs.
If there is need to track events recorded before the controller is reset or powered
off, Infortrend's Event Monitor can be used.
Descriptions below contain abbreviations. Abbreviations and Capitalized
characters are preserved for the coherency with Event Messages as they appear
on LCD screen or Terminal.
Event Index
Controller Event
[0104] DRAM Parity Error Detected
[0111] Redundant Controller Failure Detected
[0121] Power Supply Failure Detected
[0122] Fan Failure Detected
[0123] Elevated Temperature Alert
[0123] CPU Hot Temperature Detected
[0123] CPU Cold Temperature Detected
[0123] Board Hot Temperature Detected
[0123] Board Cold Temperature Detected
[0124] UPS Power Failure Detected
[0181] Controller Initialization Completed
[0114] Power Supply Unstable or NVRAM Failed
[01A1] Power Supply Back On-Line
[01A2] Fan Back On-Line
[01A3] Temperature Back To Non-Critical Levels
[01A3] CPU Hot/Cold Temperature Back to Non-Critical Levels
[01A3] Board Hot/Cold Temperature Back to Non-Critical Levels
[01A4] Peripheral Device NOTICE: UPS Power Back On
Event Messages D-1