Infortrend RAID Controller Manual

(where "filename" is the filename of the uncompressed disk image,
"/dev/fd0" refers to the device name of the floppy drive.)
The disk image files require a floppy drive equipped UNIX system to
restore to a floppy diskette. Some UNIX systems might not have the
CD-ROM drive, we provide both compressed and uncompressed disk
image files for easy file transfer between two systems.
13.4.3 Label the Installation Diskette(s)
1. Please refer to "How to Make the Installation Diskette from the
Disk Image File" section above to create the floppy diskettes for
installation.
2. Please label the diskette made of "IAAL111H" as:
+--------------------------------------+
| Infortrend RAID Controllers |
| |
| In-band SCSI Drivers and Utilities |
| for Linux |
| |
| Version 1.11H |
| (Code: IAAL111H) |
+--------------------------------------+
13.4.4 Before Using In-band SCSI for Linux
1. Make sure the "generic SCSI" exists when building Linux.
2. Set proper "Peripheral Device Type" to the controller if there is no
logical drive mapping to the host channel. Please refer to
README.TXT in "\3102\DISK" for how to set the Peripheral
Device Type to the RAID controller.
3. No extra driver software is required to be loaded.
13.4.5 To run Text RAID Manager for Linux:
1. Insert the diskette into the floppy drive and mount it.
# mount -r /dev/fd0 /mnt
2. Execute the Raidman in /tools directory.
# cd /mnt/tools
# ./raidman
In-band Text RAID Manager and SNMP Agent Installation 13-9