Infortrend RAID Controller Manual

13-26
13.10 Windows 95/98
Introduction:
The Driver/Utility package for Windows 95/98 is in the
"\3102\DISK\WIN95" directory on the installation CD-ROM:
• RAID interface module file ("RAIDCOMM.DLL")
• Text RAID Manager for Windows 95 ("RAIDMAN.EXE")
• Agent file for RAIDCOMM ("RAIDSNMP.DLL")
• The README file for installation ("README.TXT")
13.10.1 Before Using In-band SCSI Text RAID
Manager
• In order to let the In-band SCSI utilities (Text RAID Manager or
GUI RAID Manager) communicate with the RAID controller
correctly, it is a must to set the corresponded Peripheral Device
Type if there is no logical drive map to the host channel SCSI
ID/LUN.
• Please refer to the README.TXT in "\3102\DISK" of this CD disc,
or refer to the Instruction Manual for more detail information
about "Peripheral Device Type" setting.
13.10.2 Use In-band SCSI Text RAID Manager to
Configure RAID
1. Copy all the files in this directory into "system32" directory of
Windows 95/98.
C:\> COPY D:\3102\DISK\WIN95\*.* C:\WINDOWS\SYSTEM32
where "D:" refers to the driver letter of the CD-ROM drive, and
"C:\WINDOWS" refers to the Windows directory.
2. Open a "MS-DOS Prompt" window, execute "RAIDMAN.EXE".
3. The In-band SCSI Text RAID Manager provides a similar user
interface to RS-232 Terminal. Please refer to Chapter 8 of the
Instruction manual for the detail operation of the Terminal
Emulation of Text RAID Manager.
13.11 Windows NT (x86)
Introduction:
The Driver/Utility package for Windows 95/98 is in the
"\3102\DISK\WINNT" directory on the installation CD-ROM:
• RAID interface module file (RAIDCOMM.DLL")
• INI file for RAIDCOMM ("RAIDCOMM.INI")
• Text RAID Manager for Windows NT ("RAIDMAN.EXE").
• SNMP agent for Windows NT ("RAIDSNMP.DLL")
Infortrend