Infortrend RAID Controller Manual

13-28
2. The In-band SCSI Text RAID Manager provides a similar user
interface to RS-232 Terminal. Please refer to Chapter 8 of the
Instruction manual for the detail operation of the Terminal
Emulation of Text RAID Manager.
13.11.3 Install the SNMP Agent for Windows NT
The SNMP agent for Infortrend RAID controllers can be installed by
the "Infortrend GUI RAID Manager" installation. To install the SNMP
agent manually, please follow the following procedures:
1. Install SNMP service and TCP/IP network protocol to
Windows NT.
2. Copy RAIDCOMM.DLL and RAIDSNMP.DLL in this directory to
SystemRoot \system32. (where "SystemRoot" is the system root
directory of Windows NT). For Example:
COPY RAIDCOMM.DLL C:\WINNT\SYSTEM32
COPY RAIDSNMP.DLL C:\WINNT\SYSTEM32
3. At the DOS command prompt, type REGEDT32 and press
.
4. In the registry editor, walk down:
\HKEY_LOCAL_MACHINE
\SYSTEM
\CurrentControlSet
\Services
\SNMP
\Parameters
\ExtensionAgents
Add an entry for the Infortrend RAID SNMP Extension Agent, the
entry is:
n:REG_SZ:SOFTWARE\Infortrend\RAIDAgent\CurrentVersion
where "n" is the index of the extension agent of system, for default,
it may be 3.
5. Click on "ExtensionAgents" registry, select "Edit" option and then
select "Add Value". Type a proper value for value name (it may be
3), and set data type to REG_SZ, then click on "OK" button.
6. Type "SOFTWARE\Infortrend\RAIDAgent\CurrentVersion" for
string, then click on "OK" button.
7. Go to HKEY_LOCAL_MACHINE\SOFTWARE, click on
"SOFTWARE", select "Edit" option and then select "Add Key".
8. Type "Infortrend" for key name, then click on "OK" button. Click on
"Infortrend", select "Edit" option and select "Add Key".
9. Type "RAIDAgent" for key name, then click on "OK" button. Click
on "RAIDAgent", select "Edit" option and select "Add Key".
10. Type "CurrentVersion" for key name, then click on "OK" button.
Click on "CurrentVersion", select "Edit" option and select "Add
value".
Infortrend