Infortrend RAID Controller Manual

10-6
10.1.3 Copy and Replace Drives with Drives of
Larger Capacity
The expansion of logical drive can also be done by copying and
replacing all member drives with drives of higher capacity. Please
refer to the diagram below for a better understanding. The capacity of
member drives are copied and replaced one by one onto drives of
larger capacity. When all the member drives have been replaced,
execute the “Expand logical drives” function to make use of the
unused capacity.
RAID levels supported: RAID 0, 3, and 5
Figure 10 - 3 Expansion by Copy & Replace
Select from main menu “View and Edit Logical Drives.” Select a
target logical drive, press [ENTER] and scroll down to choose “copy
and replace drive.” Press [ENTER] to proceed.
Infortrend