Infortrend RAID Controller Manual

Environment Management:
B-8
SAF-TE/S.E.S. support Supported. The SAF-TE/S.E.S. modules can be
connected to the drive channel, the controller will
detect errors from SAF-TE/S.E.S. devices or notify
drive failure via SAF-TE/S.E.S..
• Both SAF-TE/S.E.S. via drive and device-selfinterfaced
are supported.
• Redundant SAF-TE/S.E.S. devices are
supported
• Multiple S.E.S. devices are supported
SAF-TE/S.E.S. polling User configurable (50ms, 100ms, 200ms, 500ms,
period
ISEMS (Infortrend Simple
Enclosure Management
Service)
1~60sec)
Supported.
Multiple SAF-TE/S.E.S. Supported.
modules on the same
channel
Multiple SAF-TE /S.E.S. Supported.
modules on different
channels
Mapping SAF-TE/S.E.S. Supported.
device to host channel for
use with Host-based SAF-
TE/S.E.S. Monitor
Dual-LED drive status Supported. Both single-LED and dual-LED drive
indicators
status indicators are supported.
SAF-TE/ S.E.S. Temperature Supported. Display the temperature value provided
value display
by enclosure SAF-TE module (if available).
Fault-bus support Provides the simplest implementation for the
enclosure management. All fault-bus input/output
signals are active-high/active-low user adjustable.
On-board controller voltage Supported. Monitors the 3.3V, 5V, and 12V voltage
monitors
status. Event trigger threshold user configurable.
On-board controller Supported. Monitors the CPU and board
temperature sensors temperature status. Event trigger threshold user
configurable.
Enclosure redundant power Supported. Fault-Bus/SAF-TE/S.E.S./ISEMS
supply status monitoring
Enclosure Fan status Supported. Fault-Bus/SAF-TE/S.E.S/ISEMS
monitoring
Enclosure UPS status Supported. Fault-Bus/SAF-TE/S.E.S/ISEMS
monitoring
Enclosure temperature Supported. Fault-Bus/SAF-TE/S.E.S/ISEMS
monitoring
Infortrend