Infortrend RAID Controller Manual

6-4
6.3 View Connected Drives:
Shown below is the Infortrend controller front panel:
2 x 16 LCD
POWER
BUSY
ATTEN
▼ ▲
buttons
ENT button
ESC button
ER2000 V3.**
Ready
Displays throughput during normal operation.
Displays messages for configuration and
management. (2 lines x 16 characters)
Lighted LED indicates power is on.
Unlit indicates no activity
Blinking indicates data is being accessed
Lighted LED indicates unprocessed cached data is
still in the memory.
Lights when an error message appears or service is
required…, when a drive fails and needs to be
replaced.
Scroll through available options
Choose or execute an option
Return to previous menu or cancel selection.
A RAID system consists of many physical drives that can be modified
and configured as the members of one or several logical
drives/volumes.
Press the front panel ENT button for
two seconds to enter the Main Menu.
Use ▼ or ▲ to navigate through the
menus. Choose "View and Edit SCSI
Drives," then press ENT.
Use ▼ or ▲ to scroll down the list of
connected drives’ information screens.
Use ▼ or ▲ to navigate through the
menus. Choose "View Drive
Information," then press ENT.
The Revision Number of the selected
SCSI drive will be shown on the LCD.
Press ▼ to view the other items.
Other items include "Serial Number"
and "Disk Capacity" (displayed in
blocks). Each block size displayed is
equal to 512K Bytes.
View and Edit
SCSI Drives
C=2 I=0 1010MB
New DRV SEAGATE
View Drive
Information ..
Revision Number:
0274
Infortrend