running machine - H-P-COSMOS Sports and Medical
running machine - H-P-COSMOS Sports and Medical
running machine - H-P-COSMOS Sports and Medical
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
[8.A2] OP20 RS232 interface protocol: COM 1<br />
Various ECG <strong>and</strong> Ergospirometry<br />
systems support the h/p/cosmos coscom<br />
protocol. Individual adaptation of<br />
protocol on request. For further<br />
information about the h/p/cosmos<br />
coscom protocol see www.coscom.org<br />
We recommend to use the h/p/cosmos<br />
coscom protocol, as it provides a high<br />
safety <strong>and</strong> functionality st<strong>and</strong>ard.<br />
h/p/cosmos para control ® <strong>and</strong><br />
h/p/cosmos para graphics ® exclusively<br />
work with the h/p/cosmos coscom<br />
protocol.<br />
For advanced h/p/cosmos coscom v3<br />
connections with Baudrate 115200<br />
please select OP20=20 . Please note<br />
that the connected peripherie/software<br />
must be approved for h/p/cosmos<br />
coscom v3 with Baudrate 115200 (for<br />
example h/p/cosmos para control 4.0).<br />
OP21 RS232 interface protocol: COM 2<br />
file: n:\article\cos14310m5-v1_06hpc-en\20120215_cos14310m5-v1.06hpc-en_manual_h-p-cosmos_<strong>running</strong>_<strong>machine</strong>.doc<br />
© 2012 h/p/cosmos sports & medical gmbh email@h-p-cosmos.com created 15.02.2012 printed 15.02.2012 page: 102 of 213<br />
optional settings<br />
§ indicates flashing: number of the RS232 interface protocol<br />
$ <strong>and</strong> % reports:<br />
OFF = RS232 not active / no protocol / interface deactivated<br />
1 = h/p/cosmos coscom v1, v2, v3 with Baudrate 9600 bps<br />
( st<strong>and</strong>ard setting COM 1 <strong>and</strong> COM 2)<br />
2 = JAEGER OXYCON (up to 1995); if available use: h/p/cosmos<br />
coscom (= 1)<br />
3 = Printer protocol (serial printer or converter required)<br />
4 = Free<br />
5 = Pacer treadmill emulation (max. 12.7 km/h)<br />
6 = MAX 1 (GE Marquette) EKG; if available use: h/p/cosmos<br />
coscom (= 1)<br />
7 = Trackmaster treadmill emulation in km/h<br />
8 = Trackmaster treadmill emulation in miles per hour<br />
9 = custo card ECG (MS DOS-Version); if available use: h/p/cosmos<br />
coscom (= 1)<br />
10 = Loop Back Test (special test plug required, available at<br />
h/p/cosmos)<br />
11 = SunTech Tango blood pressure monitor<br />
12 = Remote Control Hardware Terminal MCU 4<br />
(special hardware required)<br />
13 = Burdick T 500 treadmill emulation<br />
14 = Burdick T 600 treadmill emulation<br />
17 = Chipcard reader Ergofit (special hardware required) – only<br />
available at MCU4 (all firmware versions)<br />
or MCU5 firmware < v1.03.x<br />
18 = Chipcard reader Proxomed (special hardware required) – only<br />
available at MCU4 (all firmware versions) or MCU5 firmware <<br />
v1.03.x<br />
20 = h/p/cosmos coscom v3 with Baudrate 115200 bps<br />
See descriptions above<br />
OP23 RS232 interface protocol COM 4 § indicates flashing: number of the RS232 interface protocol<br />
$ <strong>and</strong> % reports:<br />
OFF = RS232 not active / no protocol / interface deactivated<br />
18 = Chip-card reader PROXOMED (special hardware required)<br />
20 = h/p/cosmos coscom v3 / Baudrate 115200 bps<br />
22 = Polar W:I:N:D: - System (weitere Einstellungen in Benutzer<br />
Option OP19 und Administrator Option OP16)
Change language