running machine - H-P-COSMOS Sports and Medical
running machine - H-P-COSMOS Sports and Medical
running machine - H-P-COSMOS Sports and Medical
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
[10.I1] E52 Error of<br />
Card Err<br />
01<br />
Card Err<br />
02<br />
Card Err<br />
03<br />
Card Err<br />
04<br />
RS485-cable motor control<br />
cable-defect or bad contact at the<br />
connection MCU/frequency-inverter.<br />
Only applicable at digital control (RS485)<br />
of MCU5/frequency inverter<br />
Error chip-card-drive<br />
(not all models)<br />
Error chip-card-drive<br />
(not all models)<br />
Error chip-card-drive<br />
(not all models)<br />
Error chip-card-drive<br />
(not all models)<br />
= „E 52“ ! „FU“ flashing<br />
§ $ % „HELP“ flashing<br />
file: n:\article\cos14310m5-v1_06hpc-en\20120215_cos14310m5-v1.06hpc-en_manual_h-p-cosmos_<strong>running</strong>_<strong>machine</strong>.doc<br />
© 2012 h/p/cosmos sports & medical gmbh email@h-p-cosmos.com created 15.02.2012 printed 15.02.2012 page: 152 of 213<br />
trouble shooting<br />
The MCU5-control-boards always sends a reset-message at every<br />
switch-on of the device. After 10 time-out-failures in a row, the MCU<br />
generates the E52 error-message. This is equivalent to a missing<br />
connection (e.g. cable-defect) in the cable from MCU5 to frequencyinverter.<br />
N Check RS485 plug at the MCU5 control board<br />
N Check RS485 plug at the frequency inverter<br />
N Check RS485 plug at the optocoupler board<br />
N Contact authorized service engineer<br />
= „CARD“ ! „ERR“ " „1“<br />
Running <strong>machine</strong> is still functioning (except chip card function)<br />
N Communication malfunction with Chip-Card<br />
N Insert chip-card to the chip-card-drive<br />
N Replace chip-card<br />
N Replace chip-card-drive<br />
N Contact authorized service engineer<br />
= „CARD“ ! „ERR“ " „2“<br />
Running <strong>machine</strong> is still functioning (except chip card function)<br />
N Too many training weeks<br />
N Check period of training<br />
N Check system date <strong>and</strong> time settings of the <strong>running</strong> <strong>machine</strong><br />
N Re-program chip-card<br />
= „CARD“ ! „ERR“ " „3“<br />
Running <strong>machine</strong> is still functioning (except chip card function)<br />
N Test ident on the chip-card not accepted<br />
N False chip-card in the chip-card-drive<br />
N Insert the correct chip-card<br />
= „CARD“ ! „ERR“ " „4“<br />
Running <strong>machine</strong> is still functioning (except chip card function)<br />
N unknown chip-card-malfunction<br />
N no card identified<br />
N check chip-card<br />
N insert correct chip-card<br />
N reprogram chip-card