running machine - H-P-COSMOS Sports and Medical
running machine - H-P-COSMOS Sports and Medical
running machine - H-P-COSMOS Sports and Medical
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
[6.E] Emergency-Stop / Emergency-Off<br />
When in danger of falling or in any<br />
emergency case please press the<br />
red button of the emergency-stop<br />
at the UserTerminal. At devices<br />
without UserTerminal the red<br />
emergency-stop-button is located<br />
directly at the h<strong>and</strong>rail.<br />
In order to switch on the device<br />
again, unlock the Emergency-stop<br />
by pulling or by turning it slightly<br />
to the left (depending on the<br />
type).<br />
installation & commissioning<br />
picture left unlatching by turning<br />
picture below unlatching by pulling<br />
Running <strong>machine</strong>s for sports <strong>and</strong> fitness with manufacturing date before 12/2007 will be ready for operation immediately<br />
(pay attention to the display). Running <strong>machine</strong>s with manufacturing date after 12/2007 resp. all treadmills for medical<br />
application (independet of manufacturing date) have to be switched on with the white main power on „I“ key (until 2003<br />
green “ON” or “I” key) again. Before switching it on again, however, wait for at least 1 to 2 minutes (3 phase devices: 2<br />
to 3 minutes). As mentioned above „Switching the device off“.<br />
N Use the emergency-stop only if in danger.<br />
N The emergency-stop is not to be used as a normal stop-key.<br />
picture type of stop function interface<br />
communication<br />
Safety Stop =<br />
Emergency Stop<br />
on UserTerminal<br />
(st<strong>and</strong>ard on all<br />
<strong>machine</strong>s with<br />
UserTerminal)<br />
Safety Stop =<br />
Emergency Stop<br />
External <strong>and</strong>/or<br />
additional<br />
emergency stop<br />
mushroom head<br />
type.<br />
N palm switch is hit<br />
N <strong>running</strong> belt & inclination<br />
system stop fast<br />
N <strong>machine</strong> is cut off from main<br />
power of drive motor <strong>and</strong><br />
inclination system<br />
N display, keyboard <strong>and</strong><br />
interface inactive<br />
N mushroom switch is hit<br />
N <strong>running</strong> belt & inclination<br />
system stop fast<br />
N <strong>machine</strong> is cut off from main<br />
power of drive motor <strong>and</strong><br />
inclination system<br />
N display, keyboard <strong>and</strong><br />
interface inactive<br />
communication<br />
interrupted<br />
during cut off<br />
from main<br />
power<br />
communication<br />
interrupted<br />
during cut off<br />
from main<br />
power<br />
file: n:\article\cos14310m5-v1_06hpc-en\20120215_cos14310m5-v1.06hpc-en_manual_h-p-cosmos_<strong>running</strong>_<strong>machine</strong>.doc<br />
© 2012 h/p/cosmos sports & medical gmbh email@h-p-cosmos.com created 15.02.2012 printed 15.02.2012 page: 58 of 213<br />
how to restart<br />
N wait 1 minute<br />
N pull palm switch<br />
N push “power on”<br />
button / main<br />
power<br />
N press START key,<br />
N or new comm<strong>and</strong><br />
through interface<br />
N wait 1 minute<br />
N pull mushroom<br />
switch<br />
N push “power on”<br />
button / main<br />
power<br />
N press START key,<br />
N or new comm<strong>and</strong><br />
through interface