running machine - H-P-COSMOS Sports and Medical
running machine - H-P-COSMOS Sports and Medical
running machine - H-P-COSMOS Sports and Medical
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
[7.B17] [39] Confirm speed<br />
[40] Confirm distance 0 (this step will<br />
be programmed after time)<br />
[41] Select time 5 minutes<br />
[42] Confirm time<br />
[43] Confirm time 00 seconds<br />
[44] Confirm elevation 0 %<br />
c<br />
c<br />
a or d<br />
c<br />
c<br />
c<br />
[45] Select acceleration level<br />
("deceleration") 2. a or d<br />
[46] Confirm acceleration level<br />
[47] Confirm stop-speed 0 km/h <strong>and</strong><br />
save program file<br />
c<br />
c for more<br />
than 5 seconds<br />
§ indicates distance: Value "0" is flashing<br />
file: n:\article\cos14310m5-v1_06hpc-en\20120215_cos14310m5-v1.06hpc-en_manual_h-p-cosmos_<strong>running</strong>_<strong>machine</strong>.doc<br />
© 2012 h/p/cosmos sports & medical gmbh email@h-p-cosmos.com created 15.02.2012 printed 15.02.2012 page: 96 of 213<br />
operation<br />
! indicates time (minutes): Value "0:00" is flashing<br />
! indicates time (seconds): Value "5:00" is flashing<br />
$ indicates elevation: Value "0.0" is flashing<br />
" indicates acceleration level: "Acc. 1" is flashing<br />
In this program step the speed will be reduced from 16<br />
km/h to 6 km/h at an acceleration level "2”<br />
= indicates speed: Value "0.0" is flashing<br />
% indicates program step:" St. 6 "<br />
End of Programming.<br />
The profile can be started later on in test mode Pr. 21<br />
For a better documentation we recommend to use a printer linked to the serial interface RS 232 or/<strong>and</strong> to use an external PC<br />
with the Software h/p/cosmos para graphics ® .
Change language