running machine - H-P-COSMOS Sports and Medical
running machine - H-P-COSMOS Sports and Medical
running machine - H-P-COSMOS Sports and Medical
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
[7.B3] [07] Switch over to the next mode or<br />
one mode back<br />
[08] Stop <strong>running</strong> belt<br />
[7.B4] Automatic mode<br />
c<br />
<strong>and</strong> simultaneous<br />
a or d<br />
b<br />
file: n:\article\cos14310m5-v1_06hpc-en\20120215_cos14310m5-v1.06hpc-en_manual_h-p-cosmos_<strong>running</strong>_<strong>machine</strong>.doc<br />
© 2012 h/p/cosmos sports & medical gmbh email@h-p-cosmos.com created 15.02.2012 printed 15.02.2012 page: 66 of 213<br />
operation<br />
Switch (Jump) over to the next Mode, or jump to the<br />
previous Mode. This is a perfect way to change to other<br />
Modes without stop of the belt.<br />
Running-Belt stops.<br />
(Deceleration time can be adjusted in the optional<br />
functions)<br />
Display values <strong>and</strong> pre-selected mode remain for 2<br />
minutes <strong>and</strong> will then be deleted (reset) automatically<br />
The automatic mode is for starting a training profile, a heart rate dependant speed control or a test profile.<br />
Caution: The treadmill belt will start moving automatically <strong>and</strong> the speed <strong>and</strong> elevation will be changed<br />
automatically after one of the 3 modes (profile, cardio, test) has been started. You <strong>and</strong> all other users need to get<br />
familiar with the details <strong>and</strong> risks of these modes (e.g. the max. speed <strong>and</strong> elevation of these modes) for not facing<br />
the danger of too high speeds <strong>and</strong> injuries.<br />
Additionally there is the possibility to disable each mode (manual, profile, cardio, test) in the user-option-mode (see<br />
chapter “optional settings”. This can be required in special cases for additional safety or to reduce functions of<br />
more simple operation.<br />
N Automatic operation (mode profiles, cardio, test, remote control via PC <strong>and</strong> peripheric<br />
devices) is forbidden, if the health <strong>and</strong> the condition of the test person / patient do not<br />
allow them <strong>and</strong> a doctor has not authorized these loads. Disregard may cause injuries <strong>and</strong><br />
dangerous health problems.<br />
N At automatic operation the test person / patient <strong>and</strong> supervisory staff have to impropriate<br />
exact knowledge about the expected loads before starting <strong>and</strong> anticipate an automatic<br />
load alternation (speed, acceleration, decelaration, elevation <strong>and</strong> STOP) at any time. It is<br />
necessary to meet the appropriate higher <strong>and</strong> reasonable safety precautions.<br />
[7.B5] Profile Mode / Pre-programmed training profiles<br />
Profile-mode offers 6 different programs, which, with the help of various speed <strong>and</strong> elevation combinations,<br />
simulates easy <strong>running</strong> training as well as a cross-country run.<br />
In case of activation (st<strong>and</strong>ard deactivated) in the user-options (OP11): The maximum speed, maximum elevation<br />
<strong>and</strong> the duration of the 6 profiles can be selected ("scaled"), in order to provide 6 x 6 x 6 (216 total) variations of<br />
profiles. St<strong>and</strong>ard set-up is without scaling, for quicker <strong>and</strong> easier access.<br />
All of the 6 profiles are predefined <strong>and</strong> cannot be changed in the memory. For creating your personal profile:<br />
Test No 21 ... 28 are user defined (free programmable Profiles).<br />
For a better <strong>and</strong> easier documentation we recommend to use the serial printer interface or to connect an external<br />
PC in order to use the h/p/cosmos para graphics ® for documentation.