running machine - H-P-COSMOS Sports and Medical
running machine - H-P-COSMOS Sports and Medical
running machine - H-P-COSMOS Sports and Medical
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
[12.C1] Danger precaution <strong>and</strong> operation<br />
file: n:\article\cos14310m5-v1_06hpc-en\20120215_cos14310m5-v1.06hpc-en_manual_h-p-cosmos_<strong>running</strong>_<strong>machine</strong>.doc<br />
© 2012 h/p/cosmos sports & medical gmbh email@h-p-cosmos.com created 15.02.2012 printed 15.02.2012 page: 169 of 213<br />
accessories & options<br />
N The maximum load is limited to persons not more than 140 kg body weight.<br />
N Do not adjuts the h<strong>and</strong>rails under strain. The h<strong>and</strong>rail must not be weighted by a person.<br />
N Do only use the adjustable h<strong>and</strong>rails under supervision of a trained staff member. Only trained staff is allowed<br />
to adjust the h<strong>and</strong>rails.<br />
N Do only loosen the gear tooth locking elements to adjust the angle, if the you hold the h<strong>and</strong>rail with one h<strong>and</strong>.<br />
Turn the respective lever with the h<strong>and</strong>, that holds the h<strong>and</strong>le, in the desired position.<br />
N Before weighting make sure that after the adjustment the gear tooth locking elements at the rear end are<br />
correctly engaged <strong>and</strong> that the two stabilization elements at the front (“clamping screws”) are tightened <strong>and</strong><br />
secured again.<br />
N While adjusting make sure that you do not pen in yourself or any other person at the danger spots (squeezing<br />
<strong>and</strong> jamming spots).<br />
N Using the h/p/cosmos arm support with the adjustable h<strong>and</strong>rails is not possible.<br />
[12.C2] Reproducibility of adjustments<br />
To obtain reproducibility you have to determine the individually optimal<br />
adjustments (see scaling at the locking elements at the back) for each<br />
subject <strong>and</strong> note it down appropriatly (e.g. in a patient file). We have<br />
deliberately refrained from giving you st<strong>and</strong>ard settings for particular heights,<br />
because the adjustment can widly differ according to the posture <strong>and</strong> the<br />
individual situation of the testing person.<br />
The torsional elements have a scaling at any joint, which is afferent when turned in direction to the <strong>running</strong><br />
surface. The adjustments of the height <strong>and</strong> width occurs gradually, because the interlocking of the joints works in<br />
6-degree steps.<br />
In the illustration below, which you can copy, e.g. for patient files, you can fill in the 4 datas of the scaling for the<br />
individual adjustments of a patient.