running machine - H-P-COSMOS Sports and Medical

More documents

Recommendations

Info

[11.C] Running machines, oversize External control unit / UserTerminal (Display & Keyboard) Power supply (standard, read nameplate) Dedicated line required. h/p/cosmos venus 200/75 h/p/cosmos venus 200/75 r h/p/cosmos venus 200/100 h/p/cosmos venus 200/100 r h/p/cosmos saturn 250/75 h/p/cosmos saturn 250/75 r h/p/cosmos saturn 250/100 file: n:\article\cos14310m5-v1_06hpc-en\20120215_cos14310m5-v1.06hpc-en_manual_h-p-cosmos_running_machine.doc © 2012 h/p/cosmos sports & medical gmbh email@h-p-cosmos.com created 15.02.2012 printed 15.02.2012 page: 158 of 213 h/p/cosmos saturn 250/100 r h/p/cosmos saturn 250/125 r h/p/cosmos saturn 300/75 h/p/cosmos saturn 300/75 r h/p/cosmos saturn 300/100 6 LCD displays / 6 keys / display of mode and unit with LED 400 Volt AC 3~/N/PE f: 50/60 Hz 12800 VA (min) h/p/cosmos saturn 300/100 r technical data Fuse (standard, read nameplate) 32 A 64 A Power consumption (Standard, read nameplate) 17.0 A 18.0 A 20.0 A 21.0 A 22.0 A 23.0 A 31.3 A 62.0 A Power input 6760 VA 7160 VA 7800 VA 8360 VA 8750 VA 9200 VA 12500 VA 45000VA Drive motor capacity 7500 W 11000 W 30000W Elevation motor capacity 370 W 18000W Safety standards n MDD, directive 93/42/EEC + 2007/47/EC, IEC EN 60601-1 (VDE 0750), IEC EN 60601-1-2, IEC EN 60601-1-4 VDE 0751, EN 957-1, EN 957-6 Leakage current 0.25 mA on request Isolation transformer 3 x 2000 VA 3 x 3000 VA Degree of protection class I M / type B R / IP 20 Overvoltage category Category III: Life-Earth < 300 Volt = transient over-voltage limit 4000 Volt Mode of operation acc. IEC 601-1 Continuous operation Field of application / Accuracy according to EN 957 h/p/cosmos saturn 300/125 r 3 x 4200 VA sports and medical S I A [r] = suitable for bicycle and wheel chair application (from running surface 3000 x 1250 mm standard) Classification according to MDD II b Speed / Definition 0.0 ... 40.0 km/h / 0.1 km/h 0.0 ... 11.11 m/s / 0.1 m/s Allowance* +/- 5 % Option special speed 0.0 ... 30.0 or ... 50.0 or ... 60.0 or ... 80.0 km/h Angle of inclination** Definition Dimension of running surface length x width in mm [r] = suitable for bicycle and wheel chair application -35 % ... +35 % 0.1 % -27 % ... +27%** 0.1 % h/p/cosmos saturn 450/300 rs 3 x 21000 VA -5%(-25%) … +25% 2000x750 2000x1000 2500x750 2500x1000 2500x1250 3000x750 3000x1000 3000x1250 4500x3000
Dimension frame length x width x height Track access height from floor (optional installation in pit) Weight of device Weight load limits to floors (traffic load to DIN 1055 part 3) Max. permissible user weight on running surface Environmental conditions: Transport and storage Environmental conditions: Operation h/p/cosmos venus 200/75 h/p/cosmos venus 200/75 r 2400 x1150 x 1380 h/p/cosmos venus 200/100 h/p/cosmos venus 200/100 r 2400 x 1400 x 1380 h/p/cosmos saturn 250/75 h/p/cosmos saturn 250/75 r 2900 x 1150 x 1380 h/p/cosmos saturn 250/100 file: n:\article\cos14310m5-v1_06hpc-en\20120215_cos14310m5-v1.06hpc-en_manual_h-p-cosmos_running_machine.doc © 2012 h/p/cosmos sports & medical gmbh email@h-p-cosmos.com created 15.02.2012 printed 15.02.2012 page: 159 of 213 h/p/cosmos saturn 250/100 r 2900 x 1400 x 1380 h/p/cosmos saturn 250/125 r 2900 x 1650 x 1380 h/p/cosmos saturn 300/75 h/p/cosmos saturn 300/75 r 3400 x1150 x 1380 h/p/cosmos saturn 300/100 h/p/cosmos saturn 300/100 r 3400 x1400 x 1380 technical data h/p/cosmos saturn 300/125 r 3400 x 1650 x 1380 h/p/cosmos saturn 450/300 rs on request dep. on installation 480 mm on request 850 kg 900 kg 950 kg 1000 kg 1050 kg 1100 kg 1150 kg 1250 kg on request dep. on installation 9.0 kN/m² 7.5 kN/m² 7.7 kN/m² 6.5 kN/m² 5.6 kN/m² 7.0 kN/m² 5.8 kN/m² 5.1 kN/m² on request In case of any further questions related to load limits onto floors, please ask our service department. temperature: –30...+50 °C humidity: 0...95% - without condensation barometric pressure: 700...1060hPa 280 kg (deviation on request specially made) temperature: +10...+40 °C (deviation on request) humidity: 30...70% - without condensation (up to 95% on request) barometric pressure: 700...1060hPa Maximum operating altitude: approx. 10,000 feet (3000m), without pressurization Pollution degree Degree 2: Normally only nonconductive pollution. Temporary conductivity caused by condensation is to be expected. Central lubrication system manual / running machines with [r] have automatic central lubrication system Store program space 6 training profiles / 10 test profiles / 8 user defined profiles RS232 Digital interface / serial port COM1: standard; COM2: standard; COM3: optional (standard for service); COM4: optional Heart rate measurement and heart rate dependent endurance control (target pulse programming) PC software (not for medical application) POLAR W.I.N.D. with WearLink coded transmission transmission range approx. 10 m h/p/cosmos para control ® and h/p/cosmos para graphics ® included option: h/p/cosmos para analysis ®, h/p/cosmos para motion ® Reverse belt rotation / downhill standard Safety arch with harness*** option Wheel chair stabilizer option Monitor arm and laptop computer option * Overload and weak power supply (undervoltage) could lead to higher discrepancies concerning the speed-display or dripping of the fuse. ** The time of operation of the elevation motor (TO = 15 %) converts to approx. 5 full elevation cycles. Overload can result in temporary tripping of the fuse, but can be used again after short cool down period. Treadmills of the h/p/cosmos saturn series built approx. before January 2007 have a maximum elevation of 25%. *** For maximum stress tests and with oversize running machines (track sizes) a safety facility (e.g. a safety harness with chest belt) is necessary and highly recommended. When using a front-bar handrail (crossbar), the speed is limited to 5 km/h for safety reasons. Data of weight and measurements can deviate. Ask for further details and optional equipment or visit www.h-p-cosmos.com. Subject to technical alterations without prior notice. E & OE.
Page 1 and 2:
Operating instructions and service
Page 3 and 4:
Dear customer, We would like to exp
Page 5 and 6:
h/p/cosmos saturn 300/125r h/p/cosm
Page 7 and 8:
file: n:\article\cos14310m5-v1_06hp
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
[3.D] Materials used file: n:\artic
Page 15 and 16:
[3.I] Specific safety or performanc
Page 17 and 18:
[4.]Safety, warnings, precautions,
Page 19 and 20:
Safety Stop = Emergency Stop Extern
Page 21 and 22:
[4.D] General Instructions / Safety
Page 23 and 24:
[4.E4] Connection of units installe
Page 25 and 26:
[4.F] Medical device software safet
Page 27 and 28:
[4.H] Programmable, electrical medi
Page 29 and 30:
safety, warnings, precautions, proh
Page 31 and 32:
Picture 11: classification of a net
Page 33 and 34:
Summary: safety, warnings, precauti
Page 35 and 36:
safety, warnings, precautions, proh
Page 37 and 38:
Some examples for safety features a
Page 39 and 40:
[5.]Application, Indication, Contra
Page 41 and 42:
application, indication, contra-ind
Page 43 and 44:
application, indication, contra-ind
Page 45 and 46:
[6.]Installation & commissioning [6
Page 47 and 48:
[6.A2] Transport with trolleys For
Page 49 and 50:
[6.C] Electrical installation insta
Page 51 and 52:
[6.C2] Electric safety measurements
Page 53 and 54:
N Devices with MCU4 control unit (u
Page 55 and 56:
Picture top: MCU5-control-board and
Page 57 and 58:
installation & commissioning Device
Page 59 and 60:
[6.F] Installation, Overview, Check
Page 61 and 62:
[7.]Operation [7.A] UserTerminal, k
Page 63 and 64:
The indicated values remain, after
Page 65 and 66:
[7.B3] Manual mode Initiation: Runn
Page 67 and 68:
Initiation: Running-Belt is not mov
Page 69 and 70:
[7.B7] Profile outline file: n:\art
Page 71 and 72:
[7.B7] profile 5 file: n:\article\c
Page 73 and 74:
Page 75 and 76:
[7.B10] [06] Confirm personal age [
Page 77 and 78:
[7.B12] Test mode and free program
Page 79 and 80:
[7.B13] 4 Bruce protocol e.g. for E
Page 81 and 82:
[7.B13] 11 The „Gardner Testproto
Page 83 and 84:
[7.B13] 74 Training Interval 300 ..
Page 85 and 86:
Page 87 and 88:
[7.B13] 92 Test profile file: n:\ar
Page 89 and 90:
[7.B13] 94 Test profile file: n:\ar
Page 91 and 92:
The test-result is the index-value
Page 93 and 94:
[7.B16] [13] 2000 meter walking. Wa
Page 95 and 96:
[7.B17] [19] Confirm time [20] Conf
Page 97 and 98:
[7.B18] Possibilities of interferin
Page 99 and 100:
[8.A2] List of user options / optio
Page 101 and 102:
Page 103 and 104:
[8.A2] OP27 Minimum acceleration an
Page 105 and 106:
[8.A3] Standard settings for the us
Page 107 and 108: [8.B1] OP04 Maximum speed for rever
Page 109 and 110: file: n:\article\cos14310m5-v1_06hp
Page 113 and 114: [8.B1] OP39 Elevation: display as s
Page 115 and 116: [8.B1] OP49 Type of frequency inver
Page 119 and 120: [8.B2] Standard settings of adminis
Page 121 and 122: [8.B3] List of running machines typ
Page 123 and 124: [9.B] Immediate maintenance mainten
Page 125 and 126: [9.C4] Equivalent (alternative) lea
Page 127 and 128: maintenance & safety inspections In
Page 129 and 130: [9.D2] Lubricant test maintenance &
Page 131 and 132: [9.D4] Devices with UserTerminal &
Page 133 and 134: maintenance & safety inspections Re
Page 135 and 136: maintenance & safety inspections Pr
Page 137 and 138: maintenance & safety inspections N
Page 139 and 140: Medium to achieve hygienic safety:
Page 141 and 142: [9.L] Spare parts & consumables mai
Page 143 and 144: [10.]Trouble shooting file: n:\arti
Page 145 and 146: [10.E] Voltage at the device housin
Page 147 and 148: [10.I] Error messages / Error codes
Page 151 and 152: [10.I1] E51 Error of frequency inve
Page 153 and 154: [10.I2] Devices without UserTermina
Page 155 and 156: Dimension of running surface length
Page 157: Dimension of running surface length
Page 163 and 164: [11.E1] Interface additional inform
Page 165 and 166: [12.]Accessories and options file:
Page 167 and 168: [12.B] Additional keyboard and add.
Page 169 and 170: [12.C1] Danger precaution and opera
Page 171 and 172: [02] [03] [04] [05] file: n:\articl
Page 173 and 174: [02] [03] Total view running machin
Page 175 and 176: [12.G] h/p/cosmos airwalk se 135 (a
Page 177 and 178: [12.I] h/p/cosmos robowalk ® expan
Page 179 and 180: picture type of stop function inter
Page 181 and 182: [12.M2] Change from forward to reve
Page 183 and 184: [12.P] Retrofitting / additional sa
Page 185 and 186: [12.S] Digital (serial) RS232 inter
Page 187 and 188: [12.T] Printer protocol file: n:\ar
Page 189 and 190: [12.U4] Battery of the transmitter
Page 191 and 192: [12.W] PC Software h/p/cosmos para
Page 193 and 194: [12.Y] PC Software h/p/cosmos para
Page 195 and 196: [13.B] Certificate of the TSA (TÜV
Page 197 and 198: [13.D] Certificate of compliance fo
Page 201 and 202: [14.]Disposal file: n:\article\cos1
Page 203 and 204: [16.]Appendix - Instruction and com
Page 205 and 206: [06] [07] [08] [09] file: n:\articl
Page 207 and 208: [06] [07] [16.D] Advice and support
Page 209 and 210:
[16.F] Service report - cos15531 fi
Page 211 and 212:
[16.H] Wiring diagram load circuit
Page 213:
[16.J] Wiring diagram control circu
show all

running machine - H-P-COSMOS Sports and Medical

Create successful ePaper yourself

Delete template?

Save as template?