running machine - H-P-COSMOS Sports and Medical
running machine - H-P-COSMOS Sports and Medical
running machine - H-P-COSMOS Sports and Medical
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
[7.B6] Possibilities of interfering into the profile mode manually<br />
file: n:\article\cos14310m5-v1_06hpc-en\20120215_cos14310m5-v1.06hpc-en_manual_h-p-cosmos_<strong>running</strong>_<strong>machine</strong>.doc<br />
© 2012 h/p/cosmos sports & medical gmbh email@h-p-cosmos.com created 15.02.2012 printed 15.02.2012 page: 68 of 213<br />
operation<br />
A Profile can be changed on-line, but not in the memory location. For personal profiles use test-profiles no. 21 – 24<br />
Initiation: Operational mode: Profile, <strong>running</strong>-belt is moving.<br />
[7.B6] Step no. Activity Keys Response / Display<br />
[01] Alteration of speed<br />
a or d<br />
Speed is being increased / reduced (0-max.) as long as<br />
the key get pressed. If SPEED is being reduced down to<br />
press <strong>and</strong> hold „0“ = PAUSE-position. Current values will be sustained.<br />
[02] Alteration of acceleration <strong>and</strong><br />
deceleration of speed<br />
[03] Pause Mode = Interfere a<br />
program step<br />
[04] Alteration of elevation<br />
[05] Switch over to the next program<br />
step or one program step back.<br />
[06] Switch over to the next mode or<br />
one mode<br />
c<br />
press several times<br />
<strong>and</strong> then hold<br />
a<br />
f or e<br />
press <strong>and</strong> hold<br />
c<br />
<strong>and</strong> simultaneous<br />
e or f<br />
c<br />
<strong>and</strong> simultaneous<br />
a or d<br />
Alteration of the speed is only online for this single step.<br />
The speed can not be changed in the memory. Next<br />
program step as in the profile definied.<br />
Example: For acceleration or deceleration level “3”,<br />
press 3 times the corresponding key <strong>and</strong> then hold.<br />
Note: Maximum 7 levels, limited by the maximum<br />
acceleration level selected in the Optional Mode /<br />
st<strong>and</strong>ard value = 4.<br />
= indicates: "PAUS". Running belt stops. All<br />
displays stop. Current values will be sustained.<br />
When restart with d or c all display values will be<br />
added.<br />
Elevation is being increased / reduced (0-max.) as long<br />
as the key get pressed.<br />
Alteration of the elevation is only online for this single<br />
step. The elevation can not be changed in the memory.<br />
Next program step as in the profile definied.<br />
Jump over to the next program step, or jump to the<br />
previous program step.<br />
Jump over to the next mode, or jump to the previous<br />
Mode. This is a perfect way to change to other modes<br />
without stop of the belt. For example to start manual<br />
mode for a "cool-down" period without stop of the belt<br />
For a better documentation we recommend to use a printer linked to the serial interface or/<strong>and</strong> to use an external PC with the<br />
Software h/p/cosmos para graphics ® .
Change language