running machine - H-P-COSMOS Sports and Medical

Dimension of running surface
length x width
Dimension frame
length x width x height
h/p/cosmos stellar
h/p/cosmos stellar lt
h/p/cosmos quasar
h/p/cosmos quasar lt
file: n:\article\cos14310m5-v1_06hpc-en\20120215_cos14310m5-v1.06hpc-en_manual_h-p-cosmos_running_machine.doc
© 2012 h/p/cosmos sports & medical gmbh email@h-p-cosmos.com created 15.02.2012 printed 15.02.2012 page: 157 of 213
h/p/cosmos stellar med
h/p/cosmos stellar med lt
h/p/cosmos quasar med
h/p/cosmos quasar med lt
h/p/cosmos pulsar
h/p/cosmos pulsar lt
1700 x 650 mm 1900 x 650 mm
2300 x 1050 x 1450 mm
(UserTerminal + 150 mm width)
Track access height from floor 230 mm
technical data
h/p/cosmos pulsar 3p
h/p/cosmos pulsar 3p lt
2500 x1050 x 1450 mm
(UserTerminal + 150 mm width)
Weight of device 360 kg 370 kg 370 kg 380 kg 400 kg 440 kg
Weight load limits to floors
(traffic load to DIN 1055 part 3)
6.4 kN/m² 6.1 kN/m²
In case of any further questions related to load limits onto floors, please ask our service department.
Max. permissible user weight 200 kg (deviation on request specially made)
Environmental conditions:
Transport and storage
Environmental conditions:
Operation
temperature: –30...+50 °C
humidity: 0...95% - without condensation
barometric pressure: 700...1060hPa
temperature: +10...+40 °C (deviation on request)
humidity: 30...70% - without condensation (up to 95% on request)
barometric pressure: 700...1060hPa
Maximum operating altitude: approx. 10,000 feet (3000m), without pressurization
Pollution degree Degree 2: Normally only nonconductive pollution. Temporary conductivity caused by condensation is to be expected.
Central lubrication system manual
Store program space 6 training profiles / 10 test profiles / 8 user definable profiles
RS232 Digital interface / serial port
(USB-converter optional)
Heart rate measurement and heart
rate dependent endurance control
COM1: standard;
COM2: optional;
COM3: optional (standard for service);
COM4: optional
POLAR, 1 channel receiver, ECG precisely
PC software h/p/cosmos para control ® included
options: h/p/cosmos para graphics ® and h/p/cosmos para analysis ®
COM1 and COM2: standard
COM3: optional (standard for
service);
COM4: optional
POLAR W.I.N.D. with WearLink
transmission range approx. 10 m
h/p/cosmos para control ® and
h/p/cosmos para graphics ® included
Reverse belt rotation / downhill 1 not applicable option not applicable option standard
Safety Arch with harness*** option
Handrails options: short, long, crossbar (standard)
Arm support / additional keyboard option
* Overload and weak power supply (undervoltage) could lead to higher discrepancies concerning the speed-display or dripping of the fuse. ** The time of
operation of the elevation motor (TO = 15 %) converts to approx. 5 full elevation cycles. Overload can result in temporary tripping of the fuse, but can be
used again after short cool down period. Treadmills of the h/p/cosmos saturn series built approx. before January 2007 have a maximum elevation of 25%.
*** For maximum stress tests and with oversize running machines (track sizes) a safety facility (e.g. a safety harness with chest belt) is necessary and highly
recommended. When using a front-bar handrail (crossbar), the speed is limited to 5 km/h for safety reasons. Data of weight and measurements can deviate.
Ask for further details and optional equipment or visit www.h-p-cosmos.com. Subject to technical alterations without prior notice. E & OE.