running machine - H-P-COSMOS Sports and Medical
running machine - H-P-COSMOS Sports and Medical
running machine - H-P-COSMOS Sports and Medical
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
[7.B13] 11<br />
The „Gardner Testprotocol“<br />
for application Angiology.<br />
The Gardner Testprotocol serves for evaluation of<br />
the maximum walking distance of Peripheral<br />
Arterial Disease Patients with Intermittent<br />
Claudication.<br />
The test has to be performed under permanent<br />
supervision of a doctor <strong>and</strong> a fall prevention<br />
system (e.g. safety arch with chest belt) has to be<br />
used.<br />
The patient first st<strong>and</strong>s on the side-footboards of<br />
the <strong>running</strong> <strong>machine</strong> <strong>and</strong> not on the belt. Start test<br />
profile 11 <strong>and</strong> the belt speeds up to 3.2 km/h. As<br />
the patient steps on the <strong>running</strong> belt the doctor<br />
press the START key again <strong>and</strong> by pressing the<br />
START key the second time the displays will be<br />
reset to zero.<br />
After completing the test the results can be printed<br />
on a host printer, if connected to the interface of<br />
the <strong>running</strong> <strong>machine</strong> directly.<br />
Step Duration<br />
min:sec<br />
file: n:\article\cos14310m5-v1_06hpc-en\20120215_cos14310m5-v1.06hpc-en_manual_h-p-cosmos_<strong>running</strong>_<strong>machine</strong>.doc<br />
© 2012 h/p/cosmos sports & medical gmbh email@h-p-cosmos.com created 15.02.2012 printed 15.02.2012 page: 81 of 213<br />
operation<br />
Speed Elevation Total Time<br />
min:sec<br />
Pre-Testphase. Patient st<strong>and</strong>ing on the footboards, not on the<br />
belt<br />
0 until 3.2 km/h 0 until START<br />
START<br />
is pressed<br />
is pressed<br />
Testphase. Patient steps onto the <strong>running</strong> belt.<br />
1 02:00 3.2 km/h 0 2:00<br />
2 02:00 3.2 km/h 2 4:00<br />
3 02:00 3.2 km/h 4 6:00<br />
4 02:00 3.2 km/h 6 8:00<br />
5 02:00 3.2 km/h 8 10:00<br />
6 02:00 3.2 km/h 10 12:00<br />
7 02:00 3.2 km/h 12 14:00<br />
8 02:00 3.2 km/h 14 16:00<br />
9 02:00 3.2 km/h 16 18:00<br />
10 02:00 3.2 km/h 18 20:00<br />
11 30:00 3.2 km/h 18 50:00<br />
12 - 20 not engaged / reserved for following extensions <strong>and</strong> up-dates<br />
21 - 28 free definable user profiles max. 40 Program steps / not scaleable<br />
Additional profiles in the test mode from firmware 3.02.3 – only optionally selectable, locked by default<br />
[7.B13] 70 Training<br />
Interval 600 m / 14.5 ... 17.5 km/h<br />
Step Distance/time Speed Elevation Acceleration<br />
1 600 m 14.5 km/h 0 % 3<br />
2 1:30 min 0.0 km/h<br />
3 600 m 15.5 km/h<br />
4 1:30 min 0.0 km/h<br />
5 600 m 16.5 km/h<br />
6 1:30 min 0.0 km/h<br />
7 600 m 17.5 km/h<br />
8 1:30 min 0.0 km/h