running machine - H-P-COSMOS Sports and Medical

[6.]Installation & commissioning
[6.A] Transport, unpacking and packaging
installation & commissioning
When receiving the machine in a crate or unpacked, make sure the machine, the accessories and/or the packaging is
not damaged. If you discover any damage and/or missing parts make a note on the packing-list / delivery note of the
carrier. Inform h/p/cosmos and your dealer immediately in writing about any damages and/or missing parts.
The manufacturer does not undertake any liability for any damage, complaints and missing parts
which is not reported immediately by delivery on the packing-list / delivery note.
Before you unpack the machine and accessories read instructions on the crate. Make sure that the machine, power
connection cable or any optional equipment will not be damaged during unpacking. Pay special attention on small parts,
so that you do not dispose them or any instructions with the packaging. Within Germany mostly all devices are delivered
and assembled by h/p/cosmos directly or by an authorised forwarder. If delivered by h/p/cosmos the packaging will be
taken back and recycled.
If the running machine is being delivered by a carrier, you can recycle the packaging yourself or send it back to the
manufacturer (transportation is to be paid by the customer). Often a recyclable transport tool or packaging or a
transport-fuse (metal angle with screws) is included in the extent of delivery.
Ask your dealer and the carrier to take the packaging and the recyclable transport tool back to your dealer or to
h/p/cosmos at your own costs. In some cases a credit note can be granted. Special packaging and/or carrier
constructions must not be disposed unauthorized.
[6.A1] Transport to upper or lower floors and through narrow doors
With the standard models (sizes running surface 150/50cm, 170/65cm, 190/65cm / except adjustable handrails)
the handrail at the left is easy to remove, as there are no cables inside. The handrail at the right can be
unscrewed, can be put 90° to the left ("lay it on the running belt") and then the handrail has to be temporarily fixed
with special transport fuse construction (available at h/p/cosmos) in order to avoid damages during the transport.
Under the condition that the right handrail lies flat and
temporarily fixed on the running surface, the whole
machine can be put 90° to the right to an upright
position. So the width of the machine is fairly reduced
and can be easily moved through narrow doors or
windows.
A special transport tool is available to move the
machine through aisles - see below (available as loan
object at h/p/cosmos).
file: n:\article\cos14310m5-v1_06hpc-en\20120215_cos14310m5-v1.06hpc-en_manual_h-p-cosmos_running_machine.doc
© 2012 h/p/cosmos sports & medical gmbh email@h-p-cosmos.com created 15.02.2012 printed 15.02.2012 page: 45 of 213