running machine - H-P-COSMOS Sports and Medical

Medium to achieve hygienic safety:
Bacillol plus (h/p/cosmos order number cos12179)
> See manufacturers safety warnings and data sheet
Depollution of used chleaning medium:
Bacillol plus (h/p/cosmos order number cos12179)
> Manufacturers depollution regulations
[9.J] Cleansing and adjustment of the speed-sensor/Light-barrier
maintenance & safety inspections
Depending on the model, the firmware version and the manufacturing date, the machines are equipped with …
N no speed sensor (so no cleansing required)
N Light barrier and incremental waver mounted without housing at the front (drive shaft) of the drive engine.
N Device from the construction year app. 2003 onwards have instead of the light barriers an induction sensor with
metal toothed lock washer.
N Only at oversize running machines with a running surface of 200/75cm up to 300/125cm and up to the
construction year 2002: Speed sensor mounted in its own housing at the rear part (drive shaft) of the drive engine.
Due to the aspect, that the sensors have their own housing, they must not be cleaned.
The light barrier of the drive motor is a pulse generator for the control unit. The light barrier and the incremental glass
should be cleansed carefully with a cloth moistened with alcohol in intervals of 6 - 12 months. In "built in condition" of the
glass you can also clean it with the help of a bristle brush, which has been soaked in alcohol. Clean the optical elements
in between the glass and the light barrier carefully.
file: n:\article\cos14310m5-v1_06hpc-en\20120215_cos14310m5-v1.06hpc-en_manual_h-p-cosmos_running_machine.doc
© 2012 h/p/cosmos sports & medical gmbh email@h-p-cosmos.com created 15.02.2012 printed 15.02.2012 page: 139 of 213