running machine - H-P-COSMOS Sports and Medical

More documents

Recommendations

Info

[12.D3] Reproducibility of adjustments [01] [12.E] Therapist’s seat and foot support adjustable file: n:\article\cos14310m5-v1_06hpc-en\20120215_cos14310m5-v1.06hpc-en_manual_h-p-cosmos_running_machine.doc © 2012 h/p/cosmos sports & medical gmbh email@h-p-cosmos.com created 15.02.2012 printed 15.02.2012 page: 172 of 213 accessories & options N To obtain reproducibility you have to determine the individually optimal adjustments (see scaling at the gas pressure zylinders) for each testing person and note it down appropriatly (e.g. in a patient file). We have deliberately refrained from giving you standard settings for particular heights, because the adjustment can widly differ according to the posture and the individual situation of the testing person. The bilaterally positioned and ergonomically formed therapist’s seats in combination with the adjustable foot supports provide the therapist with a back friendly seating possibility while executing a treadmill therapy at a patient. The adjustable therapist’s seats and foot supports are fixed to the treadmill via a guide rail. [12.E1] Safety precautions and operation N The max. load is limited to 200 kg body weight. N The adjustment and use of the adjustable foot support/ therapist’s seat is reserved for trained and experienced personnel, resp. should always be done under supervision N If the clamp handles are not locked sufficiently, there is danger of squeezing due to unintentional movement of the therapist’s seat or the foot support. Open and overhanging clamp handles are a source of danger as well. Therefore pay attention to always lock the fixation screws before using the seat and foot support. N Especially during adjusting the seat and foot support take care that neither you nor others get caught or trapped at the danger zones (jamming or squeezing zones). Special attention is required at following danger zones: push button at extreme tangential deviation of the handrail; moveable holder of the UserTerminal to the motor hood and to the pillars of the handrails; joint heads of the handrails, moveable foot support and therapist’s seat to the main frame and to the pillars of the handrails. [12.E2] Operation and adjustment Point Illustration Action [01] N Release the fixation screw underneath the foot support to adjust the optimal position.
[02] [03] Total view running machine h/p/cosmos locomotion 150/50 DE med file: n:\article\cos14310m5-v1_06hpc-en\20120215_cos14310m5-v1.06hpc-en_manual_h-p-cosmos_running_machine.doc © 2012 h/p/cosmos sports & medical gmbh email@h-p-cosmos.com created 15.02.2012 printed 15.02.2012 page: 173 of 213 accessories & options N Release the fixation screw underneath the seat to adjust the optimal seat position. N Fix the adjusted seat and foot support position by tightening the corresponding fixation screws
Page 1 and 2:
Operating instructions and service
Page 3 and 4:
Dear customer, We would like to exp
Page 5 and 6:
h/p/cosmos saturn 300/125r h/p/cosm
Page 7 and 8:
file: n:\article\cos14310m5-v1_06hp
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
[3.D] Materials used file: n:\artic
Page 15 and 16:
[3.I] Specific safety or performanc
Page 17 and 18:
[4.]Safety, warnings, precautions,
Page 19 and 20:
Safety Stop = Emergency Stop Extern
Page 21 and 22:
[4.D] General Instructions / Safety
Page 23 and 24:
[4.E4] Connection of units installe
Page 25 and 26:
[4.F] Medical device software safet
Page 27 and 28:
[4.H] Programmable, electrical medi
Page 29 and 30:
safety, warnings, precautions, proh
Page 31 and 32:
Picture 11: classification of a net
Page 33 and 34:
Summary: safety, warnings, precauti
Page 35 and 36:
safety, warnings, precautions, proh
Page 37 and 38:
Some examples for safety features a
Page 39 and 40:
[5.]Application, Indication, Contra
Page 41 and 42:
application, indication, contra-ind
Page 43 and 44:
application, indication, contra-ind
Page 45 and 46:
[6.]Installation & commissioning [6
Page 47 and 48:
[6.A2] Transport with trolleys For
Page 49 and 50:
[6.C] Electrical installation insta
Page 51 and 52:
[6.C2] Electric safety measurements
Page 53 and 54:
N Devices with MCU4 control unit (u
Page 55 and 56:
Picture top: MCU5-control-board and
Page 57 and 58:
installation & commissioning Device
Page 59 and 60:
[6.F] Installation, Overview, Check
Page 61 and 62:
[7.]Operation [7.A] UserTerminal, k
Page 63 and 64:
The indicated values remain, after
Page 65 and 66:
[7.B3] Manual mode Initiation: Runn
Page 67 and 68:
Initiation: Running-Belt is not mov
Page 69 and 70:
[7.B7] Profile outline file: n:\art
Page 71 and 72:
[7.B7] profile 5 file: n:\article\c
Page 73 and 74:
Page 75 and 76:
[7.B10] [06] Confirm personal age [
Page 77 and 78:
[7.B12] Test mode and free program
Page 79 and 80:
[7.B13] 4 Bruce protocol e.g. for E
Page 81 and 82:
[7.B13] 11 The „Gardner Testproto
Page 83 and 84:
[7.B13] 74 Training Interval 300 ..
Page 85 and 86:
Page 87 and 88:
[7.B13] 92 Test profile file: n:\ar
Page 89 and 90:
[7.B13] 94 Test profile file: n:\ar
Page 91 and 92:
The test-result is the index-value
Page 93 and 94:
[7.B16] [13] 2000 meter walking. Wa
Page 95 and 96:
[7.B17] [19] Confirm time [20] Conf
Page 97 and 98:
[7.B18] Possibilities of interferin
Page 99 and 100:
[8.A2] List of user options / optio
Page 101 and 102:
Page 103 and 104:
[8.A2] OP27 Minimum acceleration an
Page 105 and 106:
[8.A3] Standard settings for the us
Page 107 and 108:
[8.B1] OP04 Maximum speed for rever
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
[8.B1] OP39 Elevation: display as s
Page 115 and 116:
[8.B1] OP49 Type of frequency inver
Page 117 and 118:
Page 119 and 120:
[8.B2] Standard settings of adminis
Page 121 and 122: [8.B3] List of running machines typ
Page 123 and 124: [9.B] Immediate maintenance mainten
Page 125 and 126: [9.C4] Equivalent (alternative) lea
Page 127 and 128: maintenance & safety inspections In
Page 129 and 130: [9.D2] Lubricant test maintenance &
Page 131 and 132: [9.D4] Devices with UserTerminal &
Page 133 and 134: maintenance & safety inspections Re
Page 135 and 136: maintenance & safety inspections Pr
Page 137 and 138: maintenance & safety inspections N
Page 139 and 140: Medium to achieve hygienic safety:
Page 141 and 142: [9.L] Spare parts & consumables mai
Page 143 and 144: [10.]Trouble shooting file: n:\arti
Page 145 and 146: [10.E] Voltage at the device housin
Page 147 and 148: [10.I] Error messages / Error codes
Page 149 and 150: file: n:\article\cos14310m5-v1_06hp
Page 151 and 152: [10.I1] E51 Error of frequency inve
Page 153 and 154: [10.I2] Devices without UserTermina
Page 155 and 156: Dimension of running surface length
Page 157 and 158: Dimension of running surface length
Page 159 and 160: Dimension frame length x width x he
Page 163 and 164: [11.E1] Interface additional inform
Page 165 and 166: [12.]Accessories and options file:
Page 167 and 168: [12.B] Additional keyboard and add.
Page 169 and 170: [12.C1] Danger precaution and opera
Page 171: [02] [03] [04] [05] file: n:\articl
Page 175 and 176: [12.G] h/p/cosmos airwalk se 135 (a
Page 177 and 178: [12.I] h/p/cosmos robowalk ® expan
Page 179 and 180: picture type of stop function inter
Page 181 and 182: [12.M2] Change from forward to reve
Page 183 and 184: [12.P] Retrofitting / additional sa
Page 185 and 186: [12.S] Digital (serial) RS232 inter
Page 187 and 188: [12.T] Printer protocol file: n:\ar
Page 189 and 190: [12.U4] Battery of the transmitter
Page 191 and 192: [12.W] PC Software h/p/cosmos para
Page 193 and 194: [12.Y] PC Software h/p/cosmos para
Page 195 and 196: [13.B] Certificate of the TSA (TÜV
Page 197 and 198: [13.D] Certificate of compliance fo
Page 201 and 202: [14.]Disposal file: n:\article\cos1
Page 203 and 204: [16.]Appendix - Instruction and com
Page 205 and 206: [06] [07] [08] [09] file: n:\articl
Page 207 and 208: [06] [07] [16.D] Advice and support
Page 209 and 210: [16.F] Service report - cos15531 fi
Page 211 and 212: [16.H] Wiring diagram load circuit
Page 213: [16.J] Wiring diagram control circu
show all

running machine - H-P-COSMOS Sports and Medical

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?