running machine - H-P-COSMOS Sports and Medical
running machine - H-P-COSMOS Sports and Medical
running machine - H-P-COSMOS Sports and Medical
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
[8.A2] List of user options / optional functions<br />
file: n:\article\cos14310m5-v1_06hpc-en\20120215_cos14310m5-v1.06hpc-en_manual_h-p-cosmos_<strong>running</strong>_<strong>machine</strong>.doc<br />
© 2012 h/p/cosmos sports & medical gmbh email@h-p-cosmos.com created 15.02.2012 printed 15.02.2012 page: 99 of 213<br />
optional settings<br />
For devices without UserTerminal: An external UserTerminal or PC software h/p/cosmos para control ® is required<br />
to control the <strong>running</strong> <strong>machine</strong> via RS232 interface.<br />
[8.A2] Option Description Comment / Display<br />
OP01 Setting back (deleting) of error<br />
The required maintenance work has to be performed before deleting<br />
messages<br />
error messages. The h/p/cosmos service department has to be<br />
contacted before one of the service displays or error codes will be<br />
deleted!<br />
Confirmation in display § indicating "donE"<br />
Info: This option only sets back the error message! If the error still<br />
exists, you are not able to set back the error message. In this case<br />
consult an authorised service engineer<br />
The following intervals are set back by this operation:<br />
E.01: Oil-interval A-OP 35<br />
E.02: Service-time-interval A-OP 37<br />
E.02: Service-distance-intervall A-OP 38<br />
OP02 Total distance covered (km)<br />
Note: This option resets exclusively the causing variable. If for<br />
example the E.02 service-time-interval is being set back with this<br />
operation, the distance-interval is not set back <strong>and</strong> vice versa! Only<br />
Administrator-option OP 47 resets all three values implicitly!<br />
§ <strong>and</strong> $ indicates: total distance covered in km<br />
OP03 Indication of total hours of operation (h)<br />
= st<strong>and</strong>-by-time including runtime of<br />
motor/ <strong>running</strong> belt<br />
OP04 Indication of total hours of operation (h)<br />
= runtime of motor/<strong>running</strong> belt<br />
% indicates km<br />
§ <strong>and</strong> $ show: operation hours<br />
% reports: h<br />
§ <strong>and</strong> $ report: operation hours<br />
% shows: h<br />
OP05 Indication of Firmware-Version <strong>and</strong> date = reports “OP05” ! reports “typE”<br />
OP06 Adjustment of actual date <strong>and</strong> the real<br />
time clock<br />
" indicates device type, e.g. “1.4”<br />
§ indicates: „MCU 5“ $ reports version, e.g. “1.01.1”<br />
% reports default type, e.g. 1.3<br />
! shows: rtc for Real Time Clock<br />
$ reports flashing: date / time, year, month, date, hours, minutes,<br />
seconds
Change language