running machine - H-P-COSMOS Sports and Medical

[8.]Optional settings
[8.A] Settings of control and display options
file: n:\article\cos14310m5-v1_06hpc-en\20120215_cos14310m5-v1.06hpc-en_manual_h-p-cosmos_running_machine.doc
© 2012 h/p/cosmos sports & medical gmbh email@h-p-cosmos.com created 15.02.2012 printed 15.02.2012 page: 98 of 213
optional settings
Optional settings serve for example as an acknowledgement of error notes on the display, or for the standard setting of
the device: selection of RS232 interface protocol, etc.
Remark for devices without UserTerminal: For optional settings on devices without UserTerminal an external
UserTerminal or a connected PC with the software h/p/cosmos para control ® is required.
[8.A1] Select user options
Initiation: running belt is not moving. One of the modes LED � is flashing: (manual, profile, cardio, test)
[8.A1] Step no. Activity Keys Response / Display
[01] Select option mode (OPxx) for
users – the option mode for a
= indicates: OP 01 flashing (for option no. 01)
! and " indicating: E.rE SEt (for error reset)
administrators is only accessible and simultaneuosly
for authorised service
technicians, not for users d
and simultaneuosly
b
[02] Select option no.
[03] Confirm option no.
Example: OP 01 (OIL & other
error codes): Confirmation &
deleting by pressing:
Example: OP 02 (Distance /
km): Confirmation by pressing
Example: OP 08
(STOP-time/ "slow-down-time"):
a) change value by pressing
b) confirm value by pressing
for at least 3
seconds.
a or d
c
c
c
a) a or d
b) c
= indicates: OP 01 ... OP 53 flashing (for option no.
01 ... 53)
! and " indicate: a short explanation of the
option, e.g.: E.rE SEt (for Error reset)
Read, confirm and set options according to the following
option list. All adjustable values are going to be shown
flashing. All non-adjustable values are not going to be
shown flashing.
Display indicates: donE (confirmation)